View previous topic :: View next topic |
Author |
Message |
seilae
Joined: 28 Aug 2004 Posts: 20
|
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Sun Jan 30, 2005 7:00 pm Post subject: |
|
|
Have you tried using IR to download from the remote to see if it recognizes it as another model? _________________ Mark |
|
Back to top |
|
|
seilae
Joined: 28 Aug 2004 Posts: 20
|
Posted: Tue Feb 15, 2005 4:03 pm Post subject: |
|
|
IR 6.00 tells me:
No definition could be found for this remote (TAN0TAN0), so the data cannot be interpreted for you. Please ... |
|
Back to top |
|
|
raeffer
Joined: 18 Jul 2007 Posts: 1
|
Posted: Wed Jul 18, 2007 4:28 am Post subject: |
|
|
bump
I have this remote. Can anyone help with the above? I bought in Australia. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Wed Jul 18, 2007 7:37 am Post subject: |
|
|
We do not have an RDF for TAN0TAN0 so the absolute first step is for you to post your IR file (in the Diagnosis Area, then post a link) so we can look at it. We can provide a starter RDF for you, but you'll have to finish it by programming macros and then fixing the button codes. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
seilae
Joined: 28 Aug 2004 Posts: 20
|
Posted: Thu Jun 11, 2009 1:13 pm Post subject: |
|
|
Just found the remote again.
Here is the IR for the urc-7740 http://www.zweckstetter.de/urc7740.ir
Signature: TAN0TAN0
Processor: Samsung S3C8+
Interface: JP1
generated with IR 8.00
I currenty use an URC-7560. There is no problem getting the macros with this remote (in learning mode), and transfering the settings to the urc-7740, right? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Thu Jun 11, 2009 1:55 pm Post subject: |
|
|
Here's a starter RDF:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=6846
Could you try programming a macro (ie, 995 function) or keymove (ie, 994 function) so I can see where they go in the memory.
Could you also try changing the VPT (volume punch through, 993 function) so I can see which bytes are used to control that.
Post a new IR file with your results. Btw, you can post it in our file section if you like.
In order to get the right button codes, you would need to create macros which contain all of the buttons on the remote (and keep a list of what buttons are in the macros). _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
seilae
Joined: 28 Aug 2004 Posts: 20
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Thu Jun 11, 2009 10:55 pm Post subject: |
|
|
can you do 993's to each of the 3 device modes so I can see all the results.
I don't understand what you did with the RMDU file.
Just FYI, the buttons and keymaps in the RDF that I created are for another remote, they're not right for your remote. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
seilae
Joined: 28 Aug 2004 Posts: 20
|
Posted: Fri Jun 12, 2009 6:18 am Post subject: |
|
|
http://www.zweckstetter.de/urc7740-993_all_to_tv.ir
contains the 993 from VCR,DVD and SAT to TV
I noticed the mismatch in the keymaps and just wantetd tu give you the right mapping in the rmdu.
Can I change the Buttons in the RDF myself (there is a field called checksums that iritated me), or are there tools to create /change this. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Fri Jun 12, 2009 9:36 am Post subject: |
|
|
You misunderstood what I was looking for regarding the 993 stuff, I would need to see 4 separate IR files, one where you set VPT to TV, another where you set it to SAT, another where you set it to VCR and finally one where you turned it off.
Regarding the button codes, let's first confirm that 994 and 995 really don't work, what happens when you try to use them?
If they really don't work, do you think you can open the remote? I ask because sometimes the button codes are printed on the PCB. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
seilae
Joined: 28 Aug 2004 Posts: 20
|
Posted: Fri Jun 12, 2009 5:17 pm Post subject: |
|
|
http://www.zweckstetter.de/urc7740.ir
http://www.zweckstetter.de/urc7740-993_vcr_tv.ir
# diff urc7740.ir urc7740-993_vcr_tv.ir
1,2c1,2
< 0000: 8A 75 54 41 4E 30 54 41 4E 30 02 62 10 51 14 CB
< 0010: 26 2B 00 00 0F 08 03 00 00 00 FF FF FF FF FF FF
---
> 0000: 8E 71 54 41 4E 30 54 41 4E 30 02 62 10 51 14 CB
> 0010: 26 2B 04 00 0F 08 03 00 00 00 FF FF FF FF FF FF
http://www.zweckstetter.de/urc7740-993_dvd_tv.ir
# diff urc7740.ir urc7740-993_dvd_tv.ir
1,2c1,2
< 0000: 8A 75 54 41 4E 30 54 41 4E 30 02 62 10 51 14 CB
< 0010: 26 2B 00 00 0F 08 03 00 00 00 FF FF FF FF FF FF
---
> 0000: 8E 71 54 41 4E 30 54 41 4E 30 02 62 10 51 14 CB
> 0010: 26 2B 04 00 0F 08 03 00 00 00 FF FF FF FF FF FF
http://www.zweckstetter.de/urc7740-993_sat_tv.ir
# diff urc7740.ir urc7740-993_sat_tv.ir
1,2c1,2
< 0000: 8A 75 54 41 4E 30 54 41 4E 30 02 62 10 51 14 CB
< 0010: 26 2B 00 00 0F 08 03 00 00 00 FF FF FF FF FF FF
---
> 0000: 8E 71 54 41 4E 30 54 41 4E 30 02 62 10 51 14 CB
> 0010: 26 2B 04 00 0F 08 03 00 00 00 FF FF FF FF FF FF
Regarding 994 and 995: nothing happens; no difference in ir file and macro is not working
Do you need the 995 to find the button codes? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Fri Jun 12, 2009 6:43 pm Post subject: |
|
|
You always mention 2 device modes in the 993 operations, whereas there's only one. Each of your samples ends with "TV" and the results are always the same.
There's only one device mode in a 993 operation and that's the mode that you've assigned the VPT to. All that gets stored in the EEPROM is the one mode.
Yes, I could use the keymoves or macros to find the button codes. As that isn't going to work, could you try opening the remote to see if the codes are printed? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
seilae
Joined: 28 Aug 2004 Posts: 20
|
Posted: Sat Jun 13, 2009 6:33 am Post subject: |
|
|
I thougt there are differnces using the 993 in the device modes. I pushed sat, then Magic 993 tv to get urc7740-993_sat.tv.ir
I did the same with dvd_tv and vcr_tv.
the diff is showing me, that there are changes, but I can't interprete them.
For the following ir's I pushed Magic 993 sat for the urc7740-993_sat.ir (and so on)
# diff urc7740.ir urc7740-993_tv.ir
1,2c1,2
< 0000: 8A 75 54 41 4E 30 54 41 4E 30 02 62 10 51 14 CB
< 0010: 26 2B 00 00 0F 08 03 00 00 00 FF FF FF FF FF FF
---
> 0000: 8E 71 54 41 4E 30 54 41 4E 30 02 62 10 51 14 CB
> 0010: 26 2B 04 00 0F 08 03 00 00 00 FF FF FF FF FF FF
diff urc7740.ir urc7740-993_vcr.ir
1,2c1,2
< 0000: 8A 75 54 41 4E 30 54 41 4E 30 02 62 10 51 14 CB
< 0010: 26 2B 00 00 0F 08 03 00 00 00 FF FF FF FF FF FF
---
> 0000: 8F 70 54 41 4E 30 54 41 4E 30 02 62 10 51 14 CB
> 0010: 26 2B 04 01 0F 08 03 00 00 00 FF FF FF FF FF FF
# diff urc7740.ir urc7740-993_dvd.ir
1,2c1,2
< 0000: 8A 75 54 41 4E 30 54 41 4E 30 02 62 10 51 14 CB
< 0010: 26 2B 00 00 0F 08 03 00 00 00 FF FF FF FF FF FF
---
> 0000: 8C 73 54 41 4E 30 54 41 4E 30 02 62 10 51 14 CB
> 0010: 26 2B 04 02 0F 08 03 00 00 00 FF FF FF FF FF FF
# diff urc7740.ir urc7740-993_sat.ir
1,2c1,2
< 0000: 8A 75 54 41 4E 30 54 41 4E 30 02 62 10 51 14 CB
< 0010: 26 2B 00 00 0F 08 03 00 00 00 FF FF FF FF FF FF
---
> 0000: 8D 72 54 41 4E 30 54 41 4E 30 02 62 10 51 14 CB
> 0010: 26 2B 04 03 0F 08 03 00 00 00 FF FF FF FF FF FF
I could not open the 7740 (without force) but I've got all button codes except for the blue button with this method:
I build an update for the 7740 with Protocol NEC1 and assigned the efc 0 to the button 0, efc 1 to button 1 , and so on.
Then I uploaded this update with ir.exe and learned the button setting with the 7560.
At last I compared the learned codes with the reference in the update and the button codes in the starting rdf.
This is the mapping I found:
Code: |
bcode rdf efc learned button
01 red 17 DOWN
02 TV TV
03 Power 15 Power
04 vol+ 10 VOL+
05 vol- 11 VOL-
06 ch+ 13 CH+
07 ch- 14 CH-
08 Mute 12 MUTE
09 AUX DVD
0a blue 48 YELLOW
0b rew 33 PLAY
0c play 31 REW
0d ffwd 34 FFWD
0e green 35 RED
0f pause 32 PAUSE
10 yellow 36 GREEN
11 VCR VCR
12 SAT SAT
13 Menu 19 LEFT
14 Magic Magic
15 1 1 1
16 2 2 2
17 3 3 3
18 +10 40 AV
19 4 4 4
1a 5 5 5
1b 6 6 6
1c 7 7 7
1d 8 8 8
1e 9 9 9
1f 0 0 0
20 AV 55 UP
44 Right 24 EPG
45 Left 23 EXIT
46 Up 21 OK
47 Down 22 Menu
48 Select 25 +10
53 Exit 37 RIGHT
83 Sleep
84 Color+
85 Color-
86 Bright+
87 Bright-
|
the blue button is not sending any signal. I asume, the button code is not in the rdf. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Sat Jun 13, 2009 1:18 pm Post subject: |
|
|
I've added the VPT setting to the RDF and I've made a guess as to the settings for the individual VPT device modes. Do the instructions in the manual describe how you can turn off VPT for an individual device mode?
I appreciate all the work that you've tried to do regarding the button codes, but that's not going to get me the real button codes. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|