View previous topic :: View next topic |
Author |
Message |
hotto
Joined: 21 Jun 2021 Posts: 12
|
Posted: Fri Jun 25, 2021 9:49 am Post subject: Beginner advice |
|
|
Hi every body.
My language in english isn,t so good then i m afraid to not understand what i need.
My goal is to delocked in full mode a remote urc 11 -7555B00.
Is it possible to do it ?
If yes , I understood I need a irc files to download and buy a correct cable for my laptop win 7 ?
Thanks for helping me..
Hotto
|
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
|
Back to top |
|
|
hotto
Joined: 21 Jun 2021 Posts: 12
|
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
Posted: Fri Jun 25, 2021 5:01 pm Post subject: |
|
|
Can you get one showing the 6-pin connector and the fully assembled remote. |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3371
|
Posted: Fri Jun 25, 2021 6:11 pm Post subject: |
|
|
Based on this post from 2006 I suppose this is just the 10751075 URC 7555 remote. It is a JP1.2 remote, so should work with a typical USB to serial cable.
hotto, I don't understand what you mean by "delocked in full mode". I expect that with a cable you will be able to access the full capabilities of the remote, including making custom upgrade files for equipment that 7555 doesn't have built-in setup codes. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Fri Jun 25, 2021 7:30 pm Post subject: |
|
|
Hotto, if you are trying to program your remote using JP1, all you need is the right cable. Check out the following thread for information on cables that will work with your remote:
http://www.hifi-remote.com/forums/viewtopic.php?t=16360 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
hotto
Joined: 21 Jun 2021 Posts: 12
|
Posted: Sat Jun 26, 2021 8:50 am Post subject: |
|
|
Hi.
Then, I ll buy a cable and come back to you for further infos ...
Thanks !
Hotto |
|
Back to top |
|
|
hotto
Joined: 21 Jun 2021 Posts: 12
|
Posted: Wed Jul 28, 2021 11:50 am Post subject: Using jp1 for the first time |
|
|
Hi,
I have now bought the usb cable with the 6 wires to connect to the remote .
Once done correctly , i plug the usb into the computer (win7 or win10) and execute IR 802..
But my computer doesn't recognise the remote ?
Have i forgotten something ?
Thank you for advices !
Hotto |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Wed Jul 28, 2021 12:15 pm Post subject: Re: Using jp1 for the first time |
|
|
hotto wrote: | Hi, I have now bought the usb cable with the 6 wires to connect to the remote |
You are only supposed to connect 4 wires to the remote, which instructions were you following? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
|
Back to top |
|
|
|