View previous topic :: View next topic |
Author |
Message |
onkatr
Joined: 23 Apr 2021 Posts: 4
|
Posted: Fri Apr 23, 2021 6:18 am Post subject: URC-8610 XSight Lite Connection Problem |
|
|
Hello,
I cannot connect my remote to my computer. When I plug it in, it shows the message 'USB connected' however it is not possible to download .rmir file from the remote because the software gives the error 'No remotes found!'
Any ideas?
Thank you.
ps. And yes I did all the registry steps in the forum. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4504
|
Posted: Fri Apr 23, 2021 8:24 am Post subject: |
|
|
Make sure interface is Auto or CommHID (HID) and that batteries are fresh. Also try a different USB cable. If that doesn't work, post your rmaster.err file in the diagnostics file section and link to it here. |
|
Back to top |
|
|
onkatr
Joined: 23 Apr 2021 Posts: 4
|
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4504
|
Posted: Sat Apr 24, 2021 1:00 pm Post subject: |
|
|
I'm seeing RMIR check your 35 HID devices (may be a new record), but none are your remote. I'm not convinced the registry fix actually worked on your Xsight Lite. Can you check the registry yourself? Here are the details:
http://www.hifi-remote.com/wiki/index.php/Enhanced_Power_Management |
|
Back to top |
|
|
onkatr
Joined: 23 Apr 2021 Posts: 4
|
Posted: Sun Apr 25, 2021 9:29 am Post subject: |
|
|
I've checked the registry but I don't think that is the issue. The registry tweak is for maintaining the connection with the remote but the remote does not connect at all. As you can see from my rmir.err file there are no remotes connected. Maybe the remote is broken. Thank you for your help and time! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4504
|
Posted: Sun Apr 25, 2021 10:11 am Post subject: |
|
|
But you said the remote screen says connected. The power key will cause a near immediate disconnect after plugging in. |
|
Back to top |
|
|
onkatr
Joined: 23 Apr 2021 Posts: 4
|
Posted: Sun Apr 25, 2021 11:32 am Post subject: |
|
|
Yes, when I connect the remote, it says connected on the remote screen however there is no indication on windows that the remote is connected. The USB Connected indication stays on approximately 10 seconds and then the screen goes blank. |
|
Back to top |
|
|
clemon79
Joined: 28 Aug 2004 Posts: 56 Location: Seattle, WA |
Posted: Sun Jun 20, 2021 12:38 am Post subject: |
|
|
Replying because I have the same problem with my XSight Color. I got to the EPM screen and it says it disabled it, and indeed, when I wake the remote from the screen sleeping it does claim to be connected to usb (I was getting the 10-second drop before), but RMIR still gives me a No Remotes Found.
It looks like it did find it once or twice, weirdly, although I don't see it pop up in Device Manager at all. Would attach rmaster.err if I could, but I don't see how.
EDIT: No, I'm wrong, it shows up in DevMan as a USB Input Device. VID_06E7&PID_8004. _________________ Chris Lemon
clemon79@outlook.com |
|
Back to top |
|
|
|