URC-8610 XSight Lite Connection Problem

onkatr · Post by **onkatr** » Fri Apr 23, 2021 5:18 am

Hello,

I cannot connect my remote to my computer. When I plug it in, it shows the message 'USB connected' however it is not possible to download .rmir file from the remote because the software gives the error 'No remotes found!'

Any ideas?

Thank you.

ps. And yes I did all the registry steps in the forum.

mdavej · Post by **mdavej** » Fri Apr 23, 2021 7:24 am

Make sure interface is Auto or CommHID (HID) and that batteries are fresh. Also try a different USB cable. If that doesn't work, post your rmaster.err file in the diagnostics file section and link to it here.

onkatr · Post by **onkatr** » Sat Apr 24, 2021 9:10 am

Hello,
I have tried your suggestions but still unable to detect the remote. The file link is http://www.hifi-remote.com/forums/dload ... e_id=26312 .
Thank you.

mdavej · Post by **mdavej** » Sat Apr 24, 2021 12:00 pm

I'm seeing RMIR check your 35 HID devices (may be a new record), but none are your remote. I'm not convinced the registry fix actually worked on your Xsight Lite. Can you check the registry yourself? Here are the details:
http://www.hifi-remote.com/wiki/index.p ... Management

onkatr · Post by **onkatr** » Sun Apr 25, 2021 8:29 am

I've checked the registry but I don't think that is the issue. The registry tweak is for maintaining the connection with the remote but the remote does not connect at all. As you can see from my rmir.err file there are no remotes connected. Maybe the remote is broken. Thank you for your help and time!

mdavej · Post by **mdavej** » Sun Apr 25, 2021 9:11 am

But you said the remote screen says connected. The power key will cause a near immediate disconnect after plugging in.

onkatr · Post by **onkatr** » Sun Apr 25, 2021 10:32 am

Yes, when I connect the remote, it says connected on the remote screen however there is no indication on windows that the remote is connected. The USB Connected indication stays on approximately 10 seconds and then the screen goes blank.

clemon79 · Post by **clemon79** » Sat Jun 19, 2021 11:38 pm

Replying because I have the same problem with my XSight Color. I got to the EPM screen and it says it disabled it, and indeed, when I wake the remote from the screen sleeping it does claim to be connected to usb (I was getting the 10-second drop before), but RMIR still gives me a No Remotes Found.

It looks like it did find it once or twice, weirdly, although I don't see it pop up in Device Manager at all. Would attach rmaster.err if I could, but I don't see how.

EDIT: No, I'm wrong, it shows up in DevMan as a USB Input Device. VID_06E7&PID_8004.

JP1 Remotes

URC-8610 XSight Lite Connection Problem

URC-8610 XSight Lite Connection Problem

File link