View previous topic :: View next topic |
Author |
Message |
rhsmsg
Joined: 16 Jul 2005 Posts: 8
|
Posted: Sat Jan 09, 2016 12:48 pm Post subject: URC 8811 Multiplexer Limitation? |
|
|
I am controlling two Channel Master DVR+ units in the same room, using urc 8811 8k x3 multiplex function to switch between units. The DVR+ remote has so many keys (43) that the DVR+ upgrade Output always generates at least 7 key moves no matter what Device Type I specify so I lose the multiplex capability for 7 keys. Wondering why there isn't a Device Type that allows defining more/all the urc 8811 keys as part of the upgrade code (vs key move)? Do i have to buy a different remote? E.g. Looks like Atlas urc 1056 has much larger upgrade code set.
Thanks,
Robert |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Sat Jan 09, 2016 1:45 pm Post subject: |
|
|
The number of buttons assigned to each device mode is hard wired into the remote and there's nothing we can do to change it, even with an extender. It sounds like what you need is a special protocol that changes the device code in your upgrade. We did something like that for ReplayTV (link below).
You would use that instead of the multiplexor and it would affect your keymoves.
So, do you know S3C8 assembler?
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=1757 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
rhsmsg
Joined: 16 Jul 2005 Posts: 8
|
Posted: Sat Jan 09, 2016 3:48 pm Post subject: |
|
|
I don't know S3C8 assembler or the underlying hardware. For now, I will see if I can do some messy programming to get around this limitation using the existing jp1 functionality. Longer term, look for a different remote.
Thanks for your help,
Robert |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
|
Back to top |
|
|
rhsmsg
Joined: 16 Jul 2005 Posts: 8
|
Posted: Sat Jan 09, 2016 6:10 pm Post subject: |
|
|
I prefer not showing my IR file.
I am using the "Channel Master DVR+ CM-7500GB16" upgrade.
The vcr remote button is used for first dvr+ (2001) and the dvd button for second dvr+ (2002).
macros:
vcr = t_dvd v_tv c_dvd p_dvd o_dvd m_dvd shift-1 xshift-vcr
dvd = t_dvd v_tv c_dvd p_dvd o_dvd m_dvd shift-2 xshift-dvd
spec protocols:
dvd xshift-vcr multiplex vcr/dvd:2001
dvd xshift-dvd multiplex vcr/dvd:2002
shift-1 and shift-2 are keymoves that switch the hdmi signal to my tv between the two dvr+ units.
I have about 15 special protocols that let me repeat commands with long key press, use alternate keys, etc.
Before I got the dvr+, I had series 1 tivos which I controlled with my urc 8811 8k x3 remote so I just copied/adapted the tivo upgrade/multiplex programming for the dvr+. Everything is working with my DVR+ units, though I need to program the missing DVR+ keys. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Sat Jan 09, 2016 7:36 pm Post subject: |
|
|
I can't do anything without either seeing your IR file, or you telling me how you modified the upgrade to be unit specific. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
rhsmsg
Joined: 16 Jul 2005 Posts: 8
|
Posted: Sat Jan 09, 2016 8:58 pm Post subject: |
|
|
I changed the Setup code to 2001 for the first DVR+ and to 2002 for the second DVR+.
I also changed Device in the Protocol Parameters to 2 for the second DVR+.
No other unit specific changes were made. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Sat Jan 09, 2016 9:09 pm Post subject: |
|
|
So device code 1 is for unit 1 and device code 2 is for unit 2? (I don't care what the setup code numbers are as that doesn't affect the signal). _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
rhsmsg
Joined: 16 Jul 2005 Posts: 8
|
Posted: Sat Jan 09, 2016 9:18 pm Post subject: |
|
|
Yes. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Sat Jan 09, 2016 9:29 pm Post subject: |
|
|
As I don't have your IR file, I will have to build this into a generic URC-8811 IR file and then you can cut and paste all the parts into yours, will that work? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
rhsmsg
Joined: 16 Jul 2005 Posts: 8
|
Posted: Sat Jan 09, 2016 9:34 pm Post subject: |
|
|
Yes. When I bring up IR, can I access a cut/paste tool to transfer to another IR? If so, how? I see import but no cut/paste. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Sat Jan 09, 2016 11:04 pm Post subject: |
|
|
No, you will have to manually re-program everything by copying how I did it in my IR file. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|