3FG Expert
Joined: 19 May 2009 Posts: 3371
|
Posted: Sat Feb 08, 2014 1:56 am Post subject: |
|
|
The YSP series uses NEC1 Device 120 for standard signals and sometimes device 126 for extended signals . The RCRP05B doesn't have a simple NEC1 executor for 120; instead you need to use setup code 1331, which should already provide many of the basic functions, including inputs on the number buttons. In the instances where device 126 is needed, temporarily assign setup code 0376 before making the 994 keymove. Both of these setup codes employ the NEC 4DEV Combo executor.
Use this upgrade since it is setup for the 4DEV Combo executor. Since you'll be using the 994 command, make sure to scroll down so you can see and check the "Executor enforces S is the complement of D" box. For example, the EFC for direction Up should be 30405, and not 30437.
Resources: Yamaha Master List (probably from 2009). This has the YSP-1100 codes.
Newer YSP files.
BTW, I just uploaded the upgrade linked above. Probably I made it on Jan 1, 2012, but forgot to upload it! |
|