View previous topic :: View next topic |
Author |
Message |
RobertaZimmerman
Joined: 12 Nov 2006 Posts: 5
|
Posted: Thu Mar 11, 2010 5:37 pm Post subject: URC-6131n & NAD Receiver (or URC-8910 & NAD Receiver |
|
|
1. Device: NAD 705
2. Type of device: Receiver
3. Year: 1994~
4. JP1/UEI Remote model: URC-6131n (also have URC-8910)
5. Do you have a JP1 cable? Yes (but don't know how to use it!)
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? No (what's that? )
9. Partially working setup code? No
10. Learning remote question? No |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Thu Mar 11, 2010 6:34 pm Post subject: Re: URC-6131n & NAD Receiver (or URC-8910 & NAD Rece |
|
|
RobertaZimmerman wrote: |
5. Do you have a JP1 cable? Yes (but don't know how to use it!)
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? No (what's that? )
...
10. Learning remote question? No |
Re: No.5: Read the Beginner's Guide
Re: 6 and 10: with an 8910 you most certainly DO have a learning remote.
Re: 7: There are at least 4 NAD upgrades in the file section. Have you tried ANY of them?
Re: 8: You found the template. If in that same post you had read the description of each field in the template, it describes what this is, and even provides a link to the RC forum. _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
RobertaZimmerman
Joined: 12 Nov 2006 Posts: 5
|
Posted: Sat Mar 13, 2010 12:39 pm Post subject: |
|
|
Ooops.... it sounds like I'm getting heck.
With respect to the 4 NAD upgrade files, I did find them, but have no idea what to do with them. Last time I tried to use the JP1, I messed up my remote, so I guess it's time to start over.
I was hoping that there was a way to upgrade the 6131n, as I only need it to control my office Sony mega-changer (which it does) and the NAD 705 (which it doesn't).
I've sent an e-mail to One-For-All support, but haven't heard back yet.
R |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3371
|
Posted: Sat Mar 13, 2010 1:11 pm Post subject: |
|
|
The 6131 doesn't come from the factory with a JP1 6 pin connector installed. It is possible for a user to install the connector, but frankly it is probably easier to look for a JP1 (that would be compatible with your cable) remote on eBay.
Ordinarily I would recommend that you just buy a new $20 remote, but these aren't compatible with your cable, and I don't see any which will support the IR protocol which probably is used in you NAD (NEC1 135.124).
So the easiest thing is to just use your 8910. Start by downloading and installing the latest versions of IR.exe and RemoteMaster. Then download from your 8910 and save a file of that downloaded configuration. I think it will be easiest if you read the stickies in the Beginners forum, and then ask questions about whatever is unclear. |
|
Back to top |
|
|
RobertaZimmerman
Joined: 12 Nov 2006 Posts: 5
|
Posted: Sun Mar 14, 2010 4:02 pm Post subject: |
|
|
Thanks for the suggestion. I'll do that.
I guess what ticks me off most is that I just bought the 6131n and it mentions NAD on the external packaging. Of course, once I opened it and looked under Audio Receivers, NAD wasn't listed.
Roberta |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Sun Mar 14, 2010 4:33 pm Post subject: |
|
|
The 6131 has codes for NAD tvs. Do you know how to solder? If you were to add an EEPROM chip and a 6-pin to the 6131, you would be able to program it using the same JP1 cable that you use with the URC-8910. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
RobertaZimmerman
Joined: 12 Nov 2006 Posts: 5
|
Posted: Mon Mar 15, 2010 3:58 pm Post subject: |
|
|
It's probably not worth the effort. I haven't soldered in about 30 years, so I don't think I'd trust my skills. I'll either figure out how to use the JP1 with my 8910, or see if I can find another cheap remote that can handle the NAD 705. |
|
Back to top |
|
|
eferz Expert
Joined: 03 Jun 2010 Posts: 1078 Location: Austin, Texas |
Posted: Fri Feb 10, 2012 8:57 pm Post subject: Re: URC-6131n & NAD Receiver (or URC-8910 & NAD Rece |
|
|
RobertaZimmerman wrote: | 1. Device: NAD 705
4. JP1/UEI Remote model: URC-6131n (also have URC-8910)
5. Do you have a JP1 cable? Yes (but don't know how to use it!) |
In case you get to soldering the 6131 or figure out how to use the cable with the 8910, I found a match and recorded the IR signals with the JP1 tools to create the respective files.
_________________ Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.) |
|
Back to top |
|
|
|