Page 1 of 1
How to Add a Unlisted Protocol?
Posted: Fri May 16, 2008 10:15 pm
by papagator2
How do we add a unlisted protocol in Remotemaster. I am unable to find RC6-6-20 protocol used on Sky Italia Sattelite Box. Kindly Help.
Thanks in Advance.
Posted: Sat May 17, 2008 12:01 pm
by kupakai
Which remote do you have? RC6-6-20 protocol currently exists only for remotes using certain processors. For others, the protocol will have to be written. I'm working on one for HCS08 processor (JP1.2 remotes), but I can try others if needed.
Posted: Mon May 19, 2008 9:48 pm
by papagator2
I am Using "One for All" remote.
Posted: Tue May 20, 2008 3:50 am
by kupakai
papagator2 wrote:I am Using "One for All" remote.
Which model number (ex: URC-8820, URC-8060, etc.)?
Posted: Tue May 20, 2008 9:35 pm
by papagator2
It does not have any Number on it. All it reads is ONE for All. a Grey Colored Huge Remote Control with a Small LCD on Top.
Posted: Wed May 21, 2008 2:59 am
by unclemiltie
if you download from the remote using IR, what does it say that the remote is?
That SHOULD give you the model number, unless you have a remote that isn't supported by IR (unlikely)
Posted: Wed May 21, 2008 5:51 am
by Capn Trips
papagator2 wrote:It does not have any Number on it. All it reads is ONE for All. a Grey Colored Huge Remote Control with a Small LCD on Top.
Most UEIC remotes (which make the One For All brand) have a sticker of some sort inside the battery compartment. Take a look there and see if there are any numbers there.
Posted: Wed May 21, 2008 6:51 am
by Mark Pierson
papagator2 wrote:It does not have any Number on it.
Have you used the IR program to download from it? If so, what remote does IR say it is?
Posted: Wed May 21, 2008 6:13 pm
by papagator2
The only Number that I see inside the Battery Compartment is G062502 Seems as a Serial Number .. Does this make it which Model Number is my remote?
Posted: Wed May 21, 2008 6:37 pm
by gfb107
You can also download the latest set of
Images and Maps and try to find an image that matches your remote.
Posted: Wed May 21, 2008 7:21 pm
by Capn Trips
unclemiltie wrote:if you download from the remote using IR, what does it say that the remote is?
That SHOULD give you the model number, unless you have a remote that isn't supported by IR (unlikely)
Posted: Fri May 23, 2008 4:57 pm
by papagator2
Ok After checking on oneforall website I came across my remote control model it is URC 8910
http://www.ofausa.com/remote.php?type=URC%208910
Should I now get some resolution.
Posted: Fri May 23, 2008 6:11 pm
by kupakai
RC6-6-20 already exists for URC-8910 in RM. If you load upgrade files for Sky+ box like:
https://www.hifi-remote.com/forums/dload ... le_id=1281
or
https://www.hifi-remote.com/forums/dload ... le_id=1523
you will see it uses "RC6-M-20N, where M is already filled out as "6". Have you tries these files?
Posted: Mon May 26, 2008 2:20 pm
by Capn Trips
Had you followed this advice, you would have had your answer several days ago.
Capn Trips wrote:unclemiltie wrote:if you download from the remote using IR, what does it say that the remote is?
That SHOULD give you the model number, unless you have a remote that isn't supported by IR (unlikely)