How to Add a Unlisted Protocol?

papagator2 · Post by **papagator2** » Fri May 16, 2008 10:15 pm

How do we add a unlisted protocol in Remotemaster. I am unable to find RC6-6-20 protocol used on Sky Italia Sattelite Box. Kindly Help.

Thanks in Advance.

kupakai · Post by **kupakai** » Sat May 17, 2008 12:01 pm

Which remote do you have? RC6-6-20 protocol currently exists only for remotes using certain processors. For others, the protocol will have to be written. I'm working on one for HCS08 processor (JP1.2 remotes), but I can try others if needed.

papagator2 · Post by **papagator2** » Mon May 19, 2008 9:48 pm

I am Using "One for All" remote.

kupakai · Post by **kupakai** » Tue May 20, 2008 3:50 am

papagator2 wrote:I am Using "One for All" remote.

Which model number (ex: URC-8820, URC-8060, etc.)?

papagator2 · Post by **papagator2** » Tue May 20, 2008 9:35 pm

It does not have any Number on it. All it reads is ONE for All. a Grey Colored Huge Remote Control with a Small LCD on Top.

unclemiltie · Post by **unclemiltie** » Wed May 21, 2008 2:59 am

if you download from the remote using IR, what does it say that the remote is?

That SHOULD give you the model number, unless you have a remote that isn't supported by IR (unlikely)

Capn Trips · Post by **Capn Trips** » Wed May 21, 2008 5:51 am

papagator2 wrote:It does not have any Number on it. All it reads is ONE for All. a Grey Colored Huge Remote Control with a Small LCD on Top.

Most UEIC remotes (which make the One For All brand) have a sticker of some sort inside the battery compartment. Take a look there and see if there are any numbers there.

Mark Pierson · Post by **Mark Pierson** » Wed May 21, 2008 6:51 am

papagator2 wrote:It does not have any Number on it.

Have you used the IR program to download from it? If so, what remote does IR say it is?

papagator2 · Post by **papagator2** » Wed May 21, 2008 6:13 pm

The only Number that I see inside the Battery Compartment is G062502 Seems as a Serial Number .. Does this make it which Model Number is my remote?

gfb107 · Post by **gfb107** » Wed May 21, 2008 6:37 pm

You can also download the latest set of Images and Maps and try to find an image that matches your remote.

Capn Trips · Post by **Capn Trips** » Wed May 21, 2008 7:21 pm

unclemiltie wrote:if you download from the remote using IR, what does it say that the remote is?

That SHOULD give you the model number, unless you have a remote that isn't supported by IR (unlikely)

papagator2 · Post by **papagator2** » Fri May 23, 2008 4:57 pm

Ok After checking on oneforall website I came across my remote control model it is URC 8910

http://www.ofausa.com/remote.php?type=URC%208910

Should I now get some resolution.

kupakai · Post by **kupakai** » Fri May 23, 2008 6:11 pm

RC6-6-20 already exists for URC-8910 in RM. If you load upgrade files for Sky+ box like:

https://www.hifi-remote.com/forums/dload ... le_id=1281
or
https://www.hifi-remote.com/forums/dload ... le_id=1523

you will see it uses "RC6-M-20N, where M is already filled out as "6". Have you tries these files?

Capn Trips · Post by **Capn Trips** » Mon May 26, 2008 2:20 pm

Had you followed this advice, you would have had your answer several days ago.

Capn Trips wrote:
unclemiltie wrote:if you download from the remote using IR, what does it say that the remote is?

That SHOULD give you the model number, unless you have a remote that isn't supported by IR (unlikely)