JP1 Remotes

Good morning.
I have a "Dreambox DM600PVR" with the new DREAM Universal Remote-Contoller URC-39930RJ0-03
And my TV is a "Medion-MD 21032" therefor is no Code in the Remote.
I think no problem it gives IR.exe and so on, and make me a JP1 interface... Nothing (no contact).
Look anyway to the internet and found it gives more then JP1 eg. JP1.x ahhh... that is it...
Make me a JP1.x interface, start IR.exe 703, but also nothing...
Load "JP1xTEST.exe" programm from Tommy Tyler and check the interface, all OK.

Fount A JP1.X COMPATIBLE REMOTE ON COM1!
Signature is 10381038
Memory Adress is $E000
Memory size is $1C00 (7168)

Now my question:
if i start IR.exe and check interface it write:
"Failed to open JP1.x interface".

Sometimes it write:
"Found JP1.x succest"

But if i then press "Download from Remote" it write:
"Failed to open JP1.x interface" or sometimes it write: "Read failed -1"

I have no idea what is wrong...

Have some one connect to this Remote-Controller an now what is my problem.

Regards
Wolfgang from Berlin (Germany)

Do you have batteries in the remote? That's all I can think of.

Hello,
I have the same problem as Wolf123

I built the JP1.x Interface with jp1xtest everything is ok

jp1xtest version 0.00
**** FOUND A JP1.x COMPATIBLE REMOTE ON COM1! ****
Signature is 10381038
Memory address is $E000
Memory size is $1C00 (7168)

When I try with IR7.05 every time I get the message:
Failed to open JP1.x interface

PLEASE HELP

Try as many of the troubleshooting suggestions as you can in the docs below and please post detailed results of your efforts if you want additional help.

Serial:
https://www.hifi-remote.com/forums/dload ... le_id=5964

USB:
https://www.hifi-remote.com/forums/dload ... le_id=5965

Tommy

Special thanks to binky123, he solved the problem:

Now I use IR7.06 with updated jp12serial.dll driver that works.

I had one more problem, when I download from remote, I get the message:

There is a conflict at fixed data Address $0200. Do you want to replace the existing data with the fixed data?

Also binky123 solved the problem:

I was using an old version of the RDF for the dreambox 7020 remote.
With this one it works:
https://www.hifi-remote.com/forums/dload ... le_id=3660

Special thanks to binky123 for the fast and perfect help.

>> "Failed to open JP1.x interface"

For others having this problem and the new driver version doesn't help; I would suggest reading Tommy Tyler's troubleshooting tips posted in this thread. If you still can't get it working, pay special attention to the last paragraph of section 6.

I have my JP1 setup installed on a USB drive; when I plug the USB drive, JP1 cable & remote into my Dell D610 Latitude, I can't get JP1 to respond no matter what config I use. The lights on the remote flicker but it still produces an error.

When I plug the exact same hardware into my Dell CPX-J Latitude, it works like a charm.