Problems with new DREAMBOX Remote URC-39930RJ0-03

Wolf123 · Post by **Wolf123** » Tue Jul 17, 2007 2:36 am

Good morning.
I have a "Dreambox DM600PVR" with the new DREAM Universal Remote-Contoller URC-39930RJ0-03
And my TV is a "Medion-MD 21032" therefor is no Code in the Remote.
I think no problem it gives IR.exe and so on, and make me a JP1 interface... Nothing (no contact).
Look anyway to the internet and found it gives more then JP1 eg. JP1.x ahhh... that is it...
Make me a JP1.x interface, start IR.exe 703, but also nothing...
Load "JP1xTEST.exe" programm from Tommy Tyler and check the interface, all OK.

Fount A JP1.X COMPATIBLE REMOTE ON COM1!
Signature is 10381038
Memory Adress is $E000
Memory size is $1C00 (7168)

Now my question:
if i start IR.exe and check interface it write:
"Failed to open JP1.x interface".

Sometimes it write:
"Found JP1.x succest"

But if i then press "Download from Remote" it write:
"Failed to open JP1.x interface" or sometimes it write: "Read failed -1"

I have no idea what is wrong...

Have some one connect to this Remote-Controller an now what is my problem.

Regards
Wolfgang from Berlin (Germany)

Post by **The Robman** » Tue Jul 17, 2007 6:34 am

Do you have batteries in the remote? That's all I can think of.

xmasmc · Post by **xmasmc** » Tue Sep 18, 2007 5:07 pm

Hello,
I have the same problem as Wolf123

I built the JP1.x Interface with jp1xtest everything is ok

jp1xtest version 0.00
**** FOUND A JP1.x COMPATIBLE REMOTE ON COM1! ****
Signature is 10381038
Memory address is $E000
Memory size is $1C00 (7168)

When I try with IR7.05 every time I get the message:
Failed to open JP1.x interface

PLEASE HELP

Tommy Tyler · Post by **Tommy Tyler** » Tue Sep 18, 2007 5:53 pm

Try as many of the troubleshooting suggestions as you can in the docs below and please post detailed results of your efforts if you want additional help.

Serial:
https://www.hifi-remote.com/forums/dload ... le_id=5964

USB:
https://www.hifi-remote.com/forums/dload ... le_id=5965

Tommy

xmasmc · Post by **xmasmc** » Mon Sep 24, 2007 12:36 am

Special thanks to binky123, he solved the problem:

Now I use IR7.06 with updated jp12serial.dll driver that works.

I had one more problem, when I download from remote, I get the message:

There is a conflict at fixed data Address $0200. Do you want to replace the existing data with the fixed data?

Also binky123 solved the problem:

I was using an old version of the RDF for the dreambox 7020 remote.
With this one it works:
https://www.hifi-remote.com/forums/dload ... le_id=3660

Special thanks to binky123 for the fast and perfect help.

twons · Post by **twons** » Tue Oct 02, 2007 8:15 am

>> "Failed to open JP1.x interface"

For others having this problem and the new driver version doesn't help; I would suggest reading Tommy Tyler's troubleshooting tips posted in this thread. If you still can't get it working, pay special attention to the last paragraph of section 6.

I have my JP1 setup installed on a USB drive; when I plug the USB drive, JP1 cable & remote into my Dell D610 Latitude, I can't get JP1 to respond no matter what config I use. The lights on the remote flicker but it still produces an error.

When I plug the exact same hardware into my Dell CPX-J Latitude, it works like a charm.

JP1 Remotes

Problems with new DREAMBOX Remote URC-39930RJ0-03

Problems with new DREAMBOX Remote URC-39930RJ0-03

problems with JP1.x

JP1.x Interface problem solved