New protocols for KM

uwereinert · Post by **uwereinert** » Fri Nov 07, 2003 12:02 pm

Hi Mark!

Since "lili" was looking for Thomson TV codes, I've had downloaded 3 WAV files for my 7562 from the European OFA site and decoded these files with Alains Java program DevWav . There are 5 protocols (S3C80) in the WAV's.

Protocol 00 37 is as the same as in KM, protocols 2C, 56 and F4 are different to the versions in KM. Here are the official versions:

Upgrade protocol 0 = 00 2C (S3C8)
00 00 11 8B 19 C5 C1 40 05 06 00 14 0B 18 00 14
10 B8 0D D8 00 06 07 68 00 06 0B 1F B3 06 08 03
37 00 13 E6 13 07 E6 29 81 E6 2A 00 1C 0A 87 21
1D 97 21 13 1A F8 08 00 E0 C0 E0 C0 60 C0 56 C0
C0 44 C0 03 8D 01 46
End

Upgrade protocol 0 = 00 56 (S3C8)
1F 61 01 8B 01 00 0C 84 B0 C1 04 03 C0 16 C1 00
C4 C0 C2 C0 C3 C0 C2 C0 C3 C0 C2 22 02 36 C1 00
6B 04 02 20 0C FF 29 F4 09 F5 46 E3 80 46 EF 20
77 71 C6 F8 1F 40 F6 01 58 F6 01 0A 7B F2 77 70
AF
End

Upgrade protocol 0 = 00 F4 (S3C8)
07 09 11 8B 0F C5 C1 40 05 06 00 0C 0B 18 00 0C
10 B8 0D D8 08 00 E0 C0 E0 C0 60 C0 56 C0 C0 44
C0 03 8D 01 46
End

Perhaps John should take a closer look to figure out the differences between the protocols included in KM and the official versions.

Protocol F9 is not included in KM yet, here it is:

Upgrade protocol 0 = 00 F9 (S3C8)
00 00 01 8B 12 84 49 00 05 00 0F 0A 44 00 0F 0F
79 1F 18 00 0F 1F 18 8D 01 46
End

Uwe

jamesgammel · Post by **jamesgammel** » Fri Nov 07, 2003 1:19 pm

Question: Since all of these have a last hex entry of "46" (except 00 56) aren't they all protocols for the S3C8+? I thought S3C8's would have a "33" instead of "46".

Jim

uwereinert · Post by **uwereinert** » Fri Nov 07, 2003 1:28 pm

You are right. But Alains wav translater doesn't comes up with "S3C80+" and I think, Mark will know that the 7562 does have an S3C80+.

Uwe