Yamaha KX-500U/KX-800U

120240VAC60HZ · Post by **120240VAC60HZ** » Mon Nov 14, 2011 5:22 pm

Subject: Yamaha KX-500U

1. Device: Yamaha KX-500U (Remote is RS-K5 or RS-K12)
2. Type of device: Component Cassette Recorder/Player
3. Year: 1988-1990
4. JP1/UEI Remote model: RS 15-2116
5. Do you have a JP1 cable? Yes
6. Still have original remote? No
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes (KX-800U)
9. Partially working setup code? No
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? Yes, didn't find anything

Post by **vickyg2003** » Mon Nov 14, 2011 6:45 pm

Just for your information in the olden days when cassette decks were in use, Cassette players were grouped in with the Video codes. This upgrade corresponds to Video/0097 in the lookup tool.

https://www.hifi-remote.com/forums/dload ... e_id=10095

The Monitor function didn't decode. If someone has the time to pull this out, could you let me know what the pronto hex looked like.

Edit: I did find time to decode it, but its a partial learn so it is a missing function.

120240VAC60HZ · Post by **120240VAC60HZ** » Mon Nov 14, 2011 7:08 pm

Thank You that worked
Just to let you know I don't need the monitor function anyway (My Deck is the KX-500U which is a two head deck which does not have the monitor function that a three head deck has)

I just mentioned the KX-800U because they were similar models so I assumed it would lead me finding an upgrade (Which it did)

Thanks again

Oh about the Hex codes I don't know what is the exact lines you need so here is the KX-800U files

Decoded CCF File

Plain CCF File

Post by **vickyg2003** » Mon Nov 14, 2011 7:18 pm

Well for anyone that does need the monitor function, the only thing I can tell from that partial learn is that the OBC is less than 32.

eferz · Post by **eferz** » Mon Nov 14, 2011 8:10 pm

vickyg2003 wrote:Well for anyone that does need the monitor function, the only thing I can tell from that partial learn is that the OBC is less than 32.

I don't know if it helps, but I recorded the signals for the Yamaha KX-800U profile from the Logitech Harmony Database.

ICT file: https://www.hifi-remote.com/forums/dload ... e_id=10096

Post by **The Robman** » Mon Nov 14, 2011 10:43 pm

Eferz's file has functions not in Vicky's file, and vice versa, so I have added the new functions to Vicky's file. The Tape Monitor function is in there, along with functions for the B deck.

eferz · Post by **eferz** » Mon Nov 14, 2011 11:10 pm

The Robman wrote:Eferz's file has functions not in Vicky's file, and vice versa, so I have added the new functions to Vicky's file. The Tape Monitor function is in there, along with functions for the B deck.

Which one was the "Tape Monitor"? I have to admit that my associative skills failed me on that one.

Post by **The Robman** » Tue Nov 15, 2011 6:39 am

It was called TAPE in your file.