Cable layout on stripboard.

swazz99jhb · Post by **swazz99jhb** » Sat Sep 12, 2009 11:29 am

Hi

Can someone please double check the stripboard layout and advise if all is correct.

https://www.hifi-remote.com/forums/dload ... le_id=7226

Regards

WagonMaster · Post by **WagonMaster** » Sat Sep 12, 2009 2:27 pm

Hi!

I see only 1 problem with your layout. The base of Q1 isn't connected to anything! You need to connect it to that D1/R5 junction, which could easily be done with a simple jumper wire between strip 'a' and strip 'b', e.g. at point #14 or #15.

Hope that helps! Good luck!

P.S. I like your diagram and would appreciate your re-posting the corrected version if you can, so that I can refer others to it in the future.

Regards,
Bill

swazz99jhb · Post by **swazz99jhb** » Sun Sep 13, 2009 1:44 am

Thanx. I've uploaded the new image. I moved R5, D1 and the Tx wire to strip b, thus less soldiering.