Onkyo TX-SR605 file

warnockm · Post by **warnockm** » Mon Jan 07, 2008 11:56 pm

I've been having great luck w/ my RS 15-2117 remote. I've programmed upgrades for my cable box, Media Center and receiver. I have an Onkyo TX-SR605 receiver, and I used the 600 JP1 file to upgrade my remote. This seems to work on 99% of the functions, however, Power On is set to the power button, and power off is set to the 0 button. On the original remote, the power button toggles the power, but i can't seem to find that button in the files. Does anyone know if there is a 605 file, or how i can toggle between power On & Off?

thanks!

mdavej · Post by **mdavej** » Tue Jan 08, 2008 1:20 am

It's very easy to add to an upgrade if you have the original remote.

- Learn the power button from the original remote
- Download, and look at the learned EFC in IR
- Add power to your function sheet in KM (or RM) with the EFC above
- Map it to a button on the button sheet (you'll probably want to move the existing power on/off to discrete on/off first)
- Paste the modified upgrade into IR
- Delete the learned key in IR
- Upload

If it works, post your new 605 file here so others can benefit.

warnockm · Post by **warnockm** » Tue Jan 08, 2008 7:27 pm

Got it working. where do i post the RM file? The yahoo group doesn't let me upload.

mdavej · Post by **mdavej** » Tue Jan 08, 2008 7:33 pm

The yahoo group is pretty much dead. Most everything has been migrated to this site. To upload, click the File section link at the top of this page. Drill down to Device Upgrades - Audio, then the upload button at the top of that page.