Prosat sat code? How to get protocol?

jon_armstrong · Post by **jon_armstrong** » Thu Dec 18, 2003 2:32 pm

I just tried the following in KM Master v8.05

Make sure you set Button Codes: OBC

I entered 30 in OBC under function tab and the EFC and hex were calculated as shown:

Code: Select all

Setup TAB:

Remote: 	URC-881x / 801x / 601x
Device Type: 	SAT
Setup Code: 	1601
Button Codes: 	OBC

	
Protocol Name: 	RECS80 (45)
Device Code: 	5

Function Tab:

Functions	OBC	byte2	EFC	ov	Hex
power	    030		    238		 84

xgamer123 · Post by **xgamer123** » Thu Dec 18, 2003 4:42 pm

jon_armstrong,

Thanks, I've done all of keys and wrote to 8017. It all works now. I try to upload this setting file in KM format to here. But I can't find file attach function.

It's weird that KM re-calculate OBC to EFC/HEX after I reboot my PC. That's much easier to enter whole set of keys.

I'm going to open new topic for Closed Cation decoder after I send Prosat satellite all model remote control code. C U another topic.

Post by **The Robman** » Thu Dec 18, 2003 4:49 pm

xgamer123 wrote:Thanks, I've done all of keys and wrote to 8017. It all works now. I try to upload this setting file in KM format to here. But I can't find file attach function.

There is no ATTACH function. You should load your upgrade file into the file section at Yahoo:

http://groups.yahoo.com/group/jp1/files ... e%20Codes/

Mark Pierson · Post by **Mark Pierson** » Thu Dec 18, 2003 5:21 pm

xgamer123 wrote:It's weird that KM re-calculate OBC to EFC/HEX after I reboot my PC. That's much easier to enter whole set of keys.

I don't know if it's a language barrier or what, but I don't understand this statement. KM should calculate on the fly as you enter data. If you see the word "Calculate" in the status bar for more than a few seconds, then somehow Excel's auto-recalc got turned to manual. That can be reset to automatic by going to Tools|Options|Calulation, and selecting Automatic.

If you're try to say something else, I apologize for not understanding what you're saying.

xgamer123 · Post by **xgamer123** » Thu Dec 18, 2003 5:30 pm

It doesn't matter, Mark. When I'd tried to enter OBC, I copy/paste to IR, and it was same HEX codes. After I rebooted my PC in hours later, it became function well. Hmmm I must miss something. Anyway, it works.

xgamer123 · Post by **xgamer123** » Fri Dec 19, 2003 12:34 pm

jon,

I opened Girder saved file for Prosat. This is beginning part and first key that I've learned from O.RC. If this is what you want. I'll post entire code for you.

<?xml version="1.0" encoding="UTF-8"?>
<Girder>
<Group Name="Prosat Remote Control" Identifier="277"
Enabled="TRUE">
<Command Name="0/1 Power" Identifier="279"
Enabled="TRUE">
<StateCount>1</StateCount>
<StateBegin>1</StateBegin>
<StateCurrent>1</StateCurrent>
<StateInvert>FALSE</StateInvert>
<OSD>FALSE</OSD>
<Submatch>FALSE</Submatch>
<Topmost>TRUE</Topmost>
<OneMatch>FALSE</OneMatch>
<UseVar>FALSE</UseVar>
<MatchHidden>FALSE</MatchHidden>
<MatchNum>1</MatchNum>
<ActionType>2</ActionType>
<ActionSubType>9</ActionSubType>
<sValue1>C:Filesremote
control.wav</sValue1>
<bValue1>FALSE</bValue1>
<bValue2>FALSE</bValue2>
<bValue3>FALSE</bValue3>
<EventString
Name="EventString" Identifier="507" Enabled="TRUE" Invert="FALSE"

Device="207"
IrStr="055E"></EventString>
</Command>