366001 Insignia NS-RMT415 version 2

If you have a new remote that isn't recognized by RMIR, post the details here so we can help create a new RDF for it. Or, if there is an issue with an existing RDF or map, this is the place.
Post Reply
jeajea
Posts: 288
Joined: Wed Feb 24, 2010 5:16 pm
Location: USA

366001 Insignia NS-RMT415 version 2

Post by jeajea »

I purchased an Insignia NS-RMT415 on Ebay.
It looks like the one sold by Best Buy.

However, the signature blink back is 36601.
The label indicates (battery compartment)
URC67100BC1-002-R
Rmir download fails :(
No RDF matches signature starting 3660
Raw download works
I tried copying the 358403 NS-RMT415 RDF and saving it as 36601 but
apparently should be six digits/and or the signature is also needed
inside the file.

Rmaster.err file

Code: Select all

RemoteMaster v2.09 build 8
Incorporates IrpTransmogrifier v1.2.2
Legacy merge set = true
System Properties:
   java.version = 1.8.0_231
   java.vendor = Oracle Corporation
   os.name = Windows 10
   os.arch = x86
   java.home = C:\Program Files (x86)\Java\jre1.8.0_231
   java.class.path = D:\RM209\RemoteMaster.jar

Loading protocols from 'D:\RM209\protocols.ini'
Option to include Slingbox protocols is Off

libraryFolder=D:\RM209\Windows-x86
LibraryLoader: Attempting to load 'jp12serial' from 'D:\RM209\Windows-x86\jp12serial.dll'...
LibraryLoader: Loaded 'jp12serial' successfully from 'D:\RM209\Windows-x86\jp12serial.dll'
    JP12Serial version 0.24
LibraryLoader: Attempting to load 'hidapi' from 'D:\RM209\Windows-x86\hidapi.dll'...
LibraryLoader: Loaded 'hidapi' successfully from 'D:\RM209\Windows-x86\hidapi.dll'
    CommHID version 1.0
Loading internal library JP2BT
    JP2BT version 1.1
LibraryLoader: Attempting to load 'jp1usb' from 'D:\RM209\Windows-x86\jp1usb.dll'...
LibraryLoader: Loaded 'jp1usb' successfully from 'D:\RM209\Windows-x86\jp1usb.dll'
    JP1USB version 0.04
Loading internal library JPS
    JPS version 0.1
LibraryLoader: Attempting to load 'jp1parallel' from 'D:\RM209\Windows-x86\jp1parallel.dll'...
LibraryLoader: Loaded 'jp1parallel' successfully from 'D:\RM209\Windows-x86\jp1parallel.dll'
    JP1Parallel version 0.12
    JP1Parallel InpOutDriver is not open
    *** To use the parallel port interface, RMIR must be run once as adminstrator.
    This enables it to install the InpOut driver, a once-only task needed for
    the interface to access the port.
Using DecodeIR to decode Learned Signals
DecodeIR: Looking in 'D:\RM209'.
LibraryLoader: Attempting to load 'DecodeIR' from 'D:\RM209\Windows-x86\DecodeIR.dll'...
LibraryLoader: Loaded 'DecodeIR' successfully from 'D:\RM209\Windows-x86\DecodeIR.dll'
Using IrpTransmogrifier as decoder of learned signals
Starting normal download
Interface Name = NULL
Port Name = NULL
Testing interface: JP1.X Serial
Port Name = COM4
Opened on Port COM4
Opened interface type 1
Interface opened successfully
Base address = $EC00
Searching for RDF
Final signature sought = 3660
No matching RDF found
RemoteMaster.windowClosing() entered
has button APPS instead of wide
Last edited by jeajea on Mon Jan 06, 2020 8:29 pm, edited 3 times in total.
Jim Anderson
Top
The Robman
Site Owner
Posts: 21941
Joined: Fri Aug 01, 2003 9:37 am
Location: Chicago, IL
Contact:
Contact The Robman

Post by The Robman »

Hey Jim, I will help you with this. First things first, save the raw download and post it here in the Diagnosis Area. Then, see if the remote supports macros. If it does, start creating macros that include all of the buttons. I would suggest using the 4 color buttons to hold the macros. Once you captured all the buttons in macros, post those RMIR raw download files too.

I will PM you for some additional tasks.
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Top
jeajea
Posts: 288
Joined: Wed Feb 24, 2010 5:16 pm
Location: USA

Links to raw and jp2 dumps

Post by jeajea »

Link to raw dump

https://www.hifi-remote.com/forums/dload ... e_id=25790

I thought I was buying a remote not yet another DIY project.
:) :(
Jim Anderson
Top
The Robman
Site Owner
Posts: 21941
Joined: Fri Aug 01, 2003 9:37 am
Location: Chicago, IL
Contact:
Contact The Robman

Post by The Robman »

Here's a starter RDF, but I'll need that macro exercise completed in order to get the button codes in there.

https://www.hifi-remote.com/forums/dload ... e_id=25792
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Top
jeajea
Posts: 288
Joined: Wed Feb 24, 2010 5:16 pm
Location: USA

Link to raw dump with macros on red, green, yellow, blue.

Post by jeajea »

Link to raw dump with macros on red, green, yellow, blue.

https://www.hifi-remote.com/forums/dload ... e_id=25793

Yellow is supposed to be the numbers but doesn’t appear to send anything.

I don’t know how to add phantom and dev buttons to a macro.
Jim Anderson
Top
The Robman
Site Owner
Posts: 21941
Joined: Fri Aug 01, 2003 9:37 am
Location: Chicago, IL
Contact:
Contact The Robman

Post by The Robman »

Thanks, I'll take a look.

I don't need you to do Phantoms, because Phantoms aren't "real", they're just gaps in the button codes that you find. There's nothing special about device buttons though, so you add them in the same way you would any other buttons.
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Top
The Robman
Site Owner
Posts: 21941
Joined: Fri Aug 01, 2003 9:37 am
Location: Chicago, IL
Contact:
Contact The Robman

Post by The Robman »

I forgot to mention, I need you to list what each button in the macros are.

In case it helps, here's a list of the buttons in the approximate order they appear on the remote:

Power
Setup
TV
DVD
STB
STREAM
Menu
Info
Guide
Exit
Up
Down
Left
Right
OK
Red
Green
Yellow
Blue
Stop
List
Rec
Rew
Play
FFwd
Replay
Pause
Skip
Vol+
Vol-
Last
Mute
Ch+
Ch-
1
2
3
4
5
6
7
8
9
Dash
0
Enter
VOD
Home
PageUp
Live
Input
Opt
PageDown
Wide
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Top
jeajea
Posts: 288
Joined: Wed Feb 24, 2010 5:16 pm
Location: USA

Link to NEW raw dump with macros on red, green, yellow, blue

Post by jeajea »

Link to NEW raw dump with macros on red, green, yellow, blue.

https://www.hifi-remote.com/forums/dload ... e_id=25794

Code: Select all

red:
Power
TV
DVD
STB
STREAM
Menu
Info
Guide
Exit

green:
UP
LEFT
OK
RIGHT
DOWN
STOP
LIST
RECORD
REW
PLAY
FFW
PREV
PAUSE
NEXT

YELLOW:
1
2
3
4
5
6
7
8
9
-
0
ENTER

BLUE:
VOL+
LAST
CH+
VOL-
MUTE
CH-
VDO
HOME
PAGEUP
LIVE
INPUT
OPT
PAGEDOWN
APPS
Jim Anderson
Top
The Robman
Site Owner
Posts: 21941
Joined: Fri Aug 01, 2003 9:37 am
Location: Chicago, IL
Contact:
Contact The Robman

Post by The Robman »

That's great. The only button you didn't capture was the SETUP button, but I was able to guess at that. This version of the RMT415 appears to only have 1 phantom device mode and it's an audio mode. I have included it in the RDF, so please test whether it really works. Otherwise, I think this RDF is complete, so play with it and see if you find any problems.

https://www.hifi-remote.com/forums/dload ... e_id=25792
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Top
jeajea
Posts: 288
Joined: Wed Feb 24, 2010 5:16 pm
Location: USA

Download aborting due to incomplete read

Post by jeajea »

I am getting

Download aborting due to incomplete read

Also how many devices does this remote support (4, 5, 8 or ?)
The rdf for the other version appears to show eight.

I don’t think you can put setup in a macro using 995.

Code: Select all

RemoteMaster v2.09 build 8
Incorporates IrpTransmogrifier v1.2.2
Legacy merge set = true
System Properties:
   java.version = 1.8.0_231
   java.vendor = Oracle Corporation
   os.name = Windows 10
   os.arch = x86
   java.home = C:\Program Files (x86)\Java\jre1.8.0_231
   java.class.path = D:\RM209\RemoteMaster.jar

Loading protocols from 'D:\RM209\protocols.ini'
Option to include Slingbox protocols is Off

libraryFolder=D:\RM209\Windows-x86
LibraryLoader: Attempting to load 'jp12serial' from 'D:\RM209\Windows-x86\jp12serial.dll'...
LibraryLoader: Loaded 'jp12serial' successfully from 'D:\RM209\Windows-x86\jp12serial.dll'
    JP12Serial version 0.24
LibraryLoader: Attempting to load 'hidapi' from 'D:\RM209\Windows-x86\hidapi.dll'...
LibraryLoader: Loaded 'hidapi' successfully from 'D:\RM209\Windows-x86\hidapi.dll'
    CommHID version 1.0
Loading internal library JP2BT
    JP2BT version 1.1
LibraryLoader: Attempting to load 'jp1usb' from 'D:\RM209\Windows-x86\jp1usb.dll'...
LibraryLoader: Loaded 'jp1usb' successfully from 'D:\RM209\Windows-x86\jp1usb.dll'
    JP1USB version 0.04
Loading internal library JPS
    JPS version 0.1
LibraryLoader: Attempting to load 'jp1parallel' from 'D:\RM209\Windows-x86\jp1parallel.dll'...
LibraryLoader: Loaded 'jp1parallel' successfully from 'D:\RM209\Windows-x86\jp1parallel.dll'
    JP1Parallel version 0.12
    JP1Parallel InpOutDriver is not open
    *** To use the parallel port interface, RMIR must be run once as adminstrator.
    This enables it to install the InpOut driver, a once-only task needed for
    the interface to access the port.
Using DecodeIR to decode Learned Signals
DecodeIR: Looking in 'D:\RM209'.
LibraryLoader: Attempting to load 'DecodeIR' from 'D:\RM209\Windows-x86\DecodeIR.dll'...
LibraryLoader: Loaded 'DecodeIR' successfully from 'D:\RM209\Windows-x86\DecodeIR.dll'
Using IrpTransmogrifier as decoder of learned signals
Starting normal download
Interface Name = NULL
Port Name = NULL
Testing interface: JP1.X Serial
Port Name = COM4
Opened on Port COM4
Opened interface type 1
Interface opened successfully
Base address = $EC00
Searching for RDF
Final signature sought = 366001
Remote identified as: Insignia NS-RMT415 v2
Number of bytes read  = $FFFFFFFF
Ending normal download
Download aborting due to incomplete read
Jim Anderson
Top
The Robman
Site Owner
Posts: 21941
Joined: Fri Aug 01, 2003 9:37 am
Location: Chicago, IL
Contact:
Contact The Robman

Re: Download aborting due to incomplete read

Post by The Robman »

jeajea wrote:I am getting: Download aborting due to incomplete read
That's a new one for me, I have no idea. Obviously, all I can do here is open the .ir files that you post, I can't test it with the remote. Have you tried opening the .ir files that you created with it?
jeajea wrote:Also how many devices does this remote support (4, 5, 8 or ?)
The rdf for the other version appears to show eight.
Yeah, like I said above, I only found 1 phantom device in this one, not 4 like in the previous version.
jeajea wrote:I don’t think you can put setup in a macro using 995.
Hmm, maybe it's restricted in this remote then, because it's allowed in most of the others. That's how non-JP1 users would put a shifted key in a macro.
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Top
jeajea
Posts: 288
Joined: Wed Feb 24, 2010 5:16 pm
Location: USA

Post by jeajea »

Other than the raw dumps I don’t have any ir files for this remote.

The instructions say to use the setup key at the end of the macro. That is
how I created the macros.

6. TAP "SETUP" and wait for two blinks - RELEASE.

https://www.hifi-remote.com/forums/viewtopic.php?t=11675
Jim Anderson
Top
jeajea
Posts: 288
Joined: Wed Feb 24, 2010 5:16 pm
Location: USA

I tried a 981 reset

Post by jeajea »

I tried a 981 reset – only get one long blink
980 reset blinks four times
Jim Anderson
Top
The Robman
Site Owner
Posts: 21941
Joined: Fri Aug 01, 2003 9:37 am
Location: Chicago, IL
Contact:
Contact The Robman

Post by The Robman »

The .ir files that I'm talking about are the raw dumps, ie, the original one and the ones with macros.

You do indeed press and hold SETUP to end a macro, but you can also use it as a regular button in a macro. I just verified it on a couple of my remotes just to prove I wasn't imagining it. But it's no matter, there was only 1 button code missing, so that must have been the SETUP code button.

Now that you've done a master reset, try downloading from the remote again (ie, using the RDF).
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Top
jeajea
Posts: 288
Joined: Wed Feb 24, 2010 5:16 pm
Location: USA

I get the same error after both 981 and 980 resets.

Post by jeajea »

I get the same error after both 981 and 980 resets.
FYI: I got the same error with the “starter” RDF.
Jim Anderson
Top
Post Reply

Return to “JP1 - New Remotes & RDFs”