cheap urc for lg service menu

mdavej · Post by **mdavej** » Wed May 04, 2016 7:10 am

It most likely isn't bricked. Install fresh batteries and follow procedure 10 below to get out of update mode. If you're running Win 8, 8.1 or 10, you must also make a change to the registry.

https://www.hifi-remote.com/forums/viewt ... 7215#p27215

Registry change:
http://www.hifi-remote.com/wiki/index.p ... quirements

turbogt16v · Post by **turbogt16v** » Wed May 04, 2016 8:03 am

ok my bad,i changed the battery and it worked for the update part
what is my next move
i see that mdavej add service codes
how do i upload it
,and where to find these codes on my remote

mdavej · Post by **mdavej** » Wed May 04, 2016 8:16 am

- Install Remote Master
- Download from remote
- Go to Devices tab, New, Open (browse to my posted file), OK
- Upload to remote

When you select the device on the remote, you should see the service functions on the screen. Press the adjacent button to send the command.

I made some guesses when making the file. So if the commands don't work, I can try something else.

turbogt16v · Post by **turbogt16v** » Wed May 04, 2016 8:18 am

sory where to download Remote Master

mdavej · Post by **mdavej** » Wed May 04, 2016 8:23 am

https://sourceforge.net/projects/controlremote/files/

See the included Readme for installation instructions.

turbogt16v · Post by **turbogt16v** » Wed May 04, 2016 8:34 am

ok i think i got it will try

thank you all

turbogt16v · Post by **turbogt16v** » Wed May 04, 2016 11:08 pm

your codes for projector work good,
i cant change the country but the codes work,just for future reference.

Post by **The Robman** » Thu May 05, 2016 6:57 am

turbogt16v wrote:your codes for projector work good,
i cant change the country but the codes work,just for future reference.

Wasn't that the whole point? What would you need the remote to be able to do in order to change the country?

turbogt16v · Post by **turbogt16v** » Thu May 05, 2016 11:34 pm

well the in-start menu differs from model to model,
and in my case the country is seen but can't be selected.

Post by **The Robman** » Fri May 06, 2016 6:35 am

So the JP1 upgrade let you get into the in-start menu but it didn't offer all the choices that you were hoping for? Have you researched your model to see if there are other options?