ic. samsung s3f80. 32pin

[stif]

Hi from mx
My.control dont have jpxx port
Only this chip samsung s3f80xxx 32pins
Try program with jp1 own make. Cable
Rmir say not found
Try make jp1.x. transsistor cable
And same not found.
Anybody can sayme what cable need to program and correct pin out connection i have pdf sf380 ic

[mdavej]

Remote model number or picture?

[stif]

https://drive.google.com/file/d/0BxKSw6 ... sp=sharing
https://drive.google.com/file/d/0BxKSw6 ... sp=sharing
https://drive.google.com/file/d/0BxKSw6 ... sp=sharing
https://drive.google.com/file/d/0BxKSw6 ... sp=sharing
https://drive.google.com/file/d/0BxKSw6 ... sp=sharing
https://drive.google.com/file/d/0BxKSw6 ... sp=sharing

my ceellphone have low resolution
idont know link pics on forums
isel
model u47 plus
on pcb model 47t u47
only have this ic and anotyher component maybe xtal
sorry dont know very well english

[3FG]

Looking at the instructions for this remote, it uses different setup codes than JP1 remotes and has a different set of button presses to do the setup. I doubt that the remote is a JP1 type, even though it has a S3F80 processor. If it isn't a JP1 type, RMIR won't be able to recognize it at all.

[mdavej]

That is definitely not a JP1 remote. It is not possible to program with RMIR. Sorry

[stif]

Ok , then this procesor isnt compatible
In the list seen more control have the. Same cpu. .,, then if remote dont have any port jpxxxx is not possible program
Thanks

[3FG]

The processor is compatible, but each manufacturer of remotes has their own firmware and communication protocols. RMIR only works with JP1 remotes made by UEI, and which have firmware compatible with the JP1 communication protocol.

[stif]

Well. Thanks for their help i will try find a remote jp1xx compatible .
thank a lot [/b]

[mdavej]

Here are all the JP1 remotes we know about:

http://www.hifi-remote.com/wiki/index.p ... emoteChart