973
From JP1 Remotes
(973) Channel Lock - Locks channel control to specific device
ChLock Style 1
- TAP the CBL device button - RELEASE
- PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
- TAP 9 - 7 - 3 -- Two blinks.
- TAP CH- once to deactivate, or ...
- TAP CH+, then device key, to activate
NOTE: 4 blinks when deactivates, 2 blinks when activates Deactivated=channel, Enter, Last and numbers can be used by all devices Activated=channel, Enter, Last and numbers always go to selected device (CBL is default active)
ChLock Style 2
The RCA RCRP05B handles the 973 Channel Lock commands differently. It has the capabilty to assign the Channel group (CH+/-, digits, Last) to any device button(s). Note that the instruction sheet provided with the remote is wrong.
To lock all devices to one ChLock device:
- PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
- TAP 9 - 7 - 3. Two blinks.
- TAP Ch+
- TAP the ChLock device button. Two blinks of the selected device.
To unlock Channel Lock for all devices:
- PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
- TAP 9 - 7 - 3. Two blinks.
- TAP Ch-. Four blinks.
To assign the ChLock group of one device to a set of devices:
- TAP the device button of the desired ChLock group
- PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
- TAP 9 - 7 - 3. Two blinks
- TAP each device button in the set of devices to be reassigned
- TAP Setup. Two blinks of the ChLock device.