JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

urc-10820 + urc-3000 x10 on off buttons

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> X10 and Home Automation
View previous topic :: View next topic  
Author Message
bt101



Joined: 25 Feb 2008
Posts: 11

PostPosted: Sun Mar 02, 2008 2:45 pm    Post subject: urc-10820 + urc-3000 x10 on off buttons Reply with quote

Hi - I just got a urc-10820 remote and I want to see if I can do as much as possible before needing to hack it with JP1.

I am not having luck making it work with the ofa urc-3000 ir receiver. I am using code 0167 and I can only get the dim (+-chan), all-off, and numerical keys to work. That is, I cannot get on/off (+-vol) or all-off (mute) to work. These keys do cause the remote's led to flash, but the receiver led does not flash.

The receiver does work with my 15 yr old 15-8905 radio shack remote. I therefore tried code 0240 and none of the keys work.

I did find another thread where a user had a problem with these buttons not working, but his thread was asking about JP1 hacking right off the start.

So I could learn the codes from my old remote, or I could hack the remote with JP1. But, seriously, in this crazy world of IR compatibility, I find it hard to believe that the OFA people would forget to make their own products talk to each other. I must be doing something wrong?
Back to top
View user's profile Send private message
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 6940
Location: Florida

PostPosted: Sun Mar 02, 2008 2:48 pm    Post subject: Reply with quote

Quote:
I did find another thread where a user had a problem with these buttons not working, but his thread was asking about JP1 hacking right off the start.


You might want to post a link to that thread.
Back to top
View user's profile Send private message Visit poster's website
MaskedMan
Tivo Expert


Joined: 10 Feb 2004
Posts: 675

PostPosted: Sun Mar 02, 2008 2:49 pm    Post subject: Reply with quote

Try the following on the 10820: Using advanced codes, VOL UP- 047, VOL DOWN-239, Mute-238:

1. cd device or whatever device you're using forcode 0167
2. press and hold SET for two blinks
3. enter 9 9 4
4. tap set for one blink
5. enter 0 4 7
6. press VOL UP key

repeat for VOL down & mute
_________________
Edmund
Back to top
View user's profile Send private message
bt101



Joined: 25 Feb 2008
Posts: 11

PostPosted: Sun Mar 02, 2008 3:18 pm    Post subject: Reply with quote

Those responses were quick - thanks.

Yes, I had tried the 993 before. Actually, before I programmed anything, I tried to get X10 working, and the on/off (vol) button did not work at that point.

Subsequently, I did lock the volume to my amp, and unlocked it for the CD (x10). This is verified by using the vol keys when in CD mode, and the amp does not respond.



Also, for the link to the other post, here it is:
http://www.hifi-remote.com/forums/viewtopic.php?t=9234
I didn't want to bring up the fact that there is a similar thread, as it is quite different than what I was asking. I guess what I was really trying to say was that I did research before posting.
Back to top
View user's profile Send private message
bt101



Joined: 25 Feb 2008
Posts: 11

PostPosted: Sun Mar 02, 2008 3:27 pm    Post subject: Reply with quote

MaskedMan

I see your post has changed. Just so people can follow along, here's the original:
---------------------
PostPosted: Sun Mar 02, 2008 2:49 pm Post subject: Reply with quote
Try the following on the 10820:

1. cd device or whatever device you're using forcode 0167
2. press and hold SET for two blinks
3. enter 9 9 3
4. press VOL DOWN
Edmund
----------------------
Let me have a look at the 994 solution.
I think that this is programming punch through.
Let me give it a try.
Back to top
View user's profile Send private message
MaskedMan
Tivo Expert


Joined: 10 Feb 2004
Posts: 675

PostPosted: Sun Mar 02, 2008 3:28 pm    Post subject: Reply with quote

Yes, I tested the 993 and it didn't work, so I edited the post above, try the advanced codes instead.


edit: the advanced codes should be 5 digit, so you have to add two zeroes to the front of each, VOL UP-00047, VOL Down-00239, Mute- 00238.
_________________
Edmund
Back to top
View user's profile Send private message
bt101



Joined: 25 Feb 2008
Posts: 11

PostPosted: Sun Mar 02, 2008 3:43 pm    Post subject: Reply with quote

Thanks MaskedMan - you must also ride a white horse. Your silver bullet worked.

I'll have to do some digging on these advanced codes. I recall seeing the term, but I don't recall a lot of info on it. It does sound significant. That is, equally as important as learning or JP1. It may already be there, but it seems worthy of a sticky.

Thanks
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18077
Location: Chicago, IL

PostPosted: Sun Mar 02, 2008 8:29 pm    Post subject: Reply with quote

Here's where those advanced codes come from...
http://www.hifi-remote.com/cgi-bin2/ueic.cgi?home_0167

and here's more info...
http://www.hifi-remote.com/ofa/advanced.shtml
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> X10 and Home Automation All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central