JP1 Remotes

Steve · Joined: 07 Oct 2007 Posts: 13

I have a URC 8910 remote, and its been working fine...but after a few program loads...I went back in to make a change and now its giving me a memory fault error ( Bad E2 )

I have tried to reset back to factory using the OPS Reset....but thats when it gives me the ( Bad E2 ) error.

Has anyone had this problem, and if so...what does it take to fix it ??

Thanks for any help !!

Steve

vickyg2003 · Posted: Sun Nov 11, 2007 3:35 pm Post subject:

Is an ops reset a 980? If so, you might want to try a manufacturer's reset 981. That's generally the fixall for JP1 remotes.

Steve · Joined: 07 Oct 2007 Posts: 13

I tried the ops reset but still no good...unless there is another way I can reset by using my JP1 cable ??

Steve · Joined: 07 Oct 2007 Posts: 13

How do you do a manufacturer's reset 981 ?? ...I do not see it under the setup menu's ??

Capn Trips · Expert Joined: 03 Oct 2003 Posts: 3990

There's a cleverly-hidden and even more cleverly-named sticky post immediately above your post that describes the MFR reset. This usually fixes the Bad E2 error.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!

Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)

Steve · Joined: 07 Oct 2007 Posts: 13

Thanks for the help !!