View previous topic :: View next topic |
Author |
Message |
truegodfather
Joined: 13 Sep 2007 Posts: 17
|
Posted: Thu Sep 13, 2007 2:41 pm Post subject: Upgrading a Remote |
|
|
I have a oneforall URC6690 remote. I have a CNX Conaxsat Duo FTA receiver. I have downloaded the remote codes made by rob but I am not sure how to get them to the remote. I have a JP1 Cable, IR.exe, keymap master and remote master. I am able to load the Conaxsat txt file to keymap master but not sure what to do from there.
Help would be appreciated
Thanks |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Thu Sep 13, 2007 3:10 pm Post subject: |
|
|
What part of the beginner's readme is a stumbling block for you? _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Thu Sep 13, 2007 3:13 pm Post subject: |
|
|
Exactly, it's hard for us to try and clarify one of the steps if we don't know which step is not clear. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
truegodfather
Joined: 13 Sep 2007 Posts: 17
|
Posted: Thu Sep 13, 2007 4:10 pm Post subject: |
|
|
I need to know how to put the Conaxsat file onto my remote |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Thu Sep 13, 2007 4:16 pm Post subject: |
|
|
OK, we'll do this the hard way.
Have you read this?
If not, please do so and then tell us which step you are stuck on.
If you HAVE read it - please tell us which step you are stuck on.
Quote: | Summary 1 - Loading an Upgrade
1. Download the upgrade file from the File Section.
2. Load it into KM using KM's "LOAD" button (in the Setup sheet)
3. Change the remote to your remote.
4. Enter any addition functions that you have codes for in the Functions sheet.
5. Re-arrange the buttons as you see fit in the Buttons sheet.
6. Copy the code blocks from the Setup sheet over to IR.
7. Assign the new setup code to a device button in IR and re-load into your remote. |
_________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
greenough1
Joined: 30 Jan 2005 Posts: 659
|
Posted: Thu Sep 13, 2007 5:14 pm Post subject: |
|
|
I would think "the hard way" would be the way of your sig, Capn
The easy way is the way you're going 8)
Best,
jeff |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Thu Sep 13, 2007 5:54 pm Post subject: |
|
|
truegodfather wrote: | I need to know how to put the Conaxsat file onto my remote |
We got that much from your first post. We assume that you have read the beginners docs (like this one) but found some parts hard to understand. What we need to know is WHICH parts you find hard to understand? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
truegodfather
Joined: 13 Sep 2007 Posts: 17
|
Posted: Thu Sep 13, 2007 10:54 pm Post subject: |
|
|
I load the Conaxsat txt file into keymap-master with no problems I see all of the codes for the remote.
My problem is when press the go to ir button Ir loads by I dont see the Conaxsat file.
in the beginners guide it says to press the add button to add the copied files but I dont even see the add button. |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Fri Sep 14, 2007 1:59 am Post subject: |
|
|
(1) Open IR.
(2) Download from your remote, so that you don't lose your settings.
(You might want to "File>Save" before continuing)
(3) In KM, in the upper left corner of the Device Upgrade block is an icon with a clipboard. Click that button and the upgrade is copied to the clipboard.
(4) In IR, go to the Device Upgrade page.
(5) Click the "add" button at the bottom of that page.
(6) In the middle of the pop-up window, right-click and "Paste" and the Device Upgrade fields will populate with your upgrade.
(7) In IR's General Tab, assign that setup code and device type to the device button you want.
(8) If KM shows a Protocol upgrade, as well, repeate steps (3)-(6) substituting the word "Protocol" for "Device"
(9) Upload to you your remote _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
|