View previous topic :: View next topic |
Author |
Message |
greatminds
Joined: 18 Apr 2007 Posts: 2
|
Posted: Wed Apr 18, 2007 8:46 pm Post subject: coolsat 8000HD |
|
|
Folks,
Thank you vey much to everyone who is maintaing this site. It has very useful information.
I am planig to buy a SlingboxPro. But just doing my homewor before I get it.
I have coolsat 8000HD FTA receiver. Would I be able to use it with the SlingboxPro ?
Slingbox does not list coolsat at all in the devices list it spports. I am very new to using a slingbx, Could any one please help me out with any information on this ?
Are there any bin files available to make this work with coolsat 8000HD ?
Thank you. |
|
Back to top |
|
|
geolez
Joined: 26 Apr 2007 Posts: 9
|
Posted: Fri Apr 27, 2007 7:15 pm Post subject: I am in the same boat! |
|
|
Got the slingPro hooked up to the Coolsat 8000 but i have NO IR codes. I have been asking around and there does not seem to be anything for it for the time being. A little frustrating but hey all good things come to those who wait! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
|
Back to top |
|
|
geolez
Joined: 26 Apr 2007 Posts: 9
|
Posted: Sat Apr 28, 2007 6:46 am Post subject: Instructions on KM |
|
|
Thanks Robman, I just need the instructions on how to use KM now. The update file is saved as a text. Do i need to convert it to an XL sheet and then load it? Then what do we do? Anyways any help would be great my man! Thanks! |
|
Back to top |
|
|
gfb107 Expert
Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Sat Apr 28, 2007 10:46 am Post subject: |
|
|
Even though that particular file is a KM file, you can use either KM or RM to modify it. In your case, as your goal is to program a Slingbox, you will need to use RM.
To get an idea of who to use RM, read this...
http://www.hifi-remote.com/jp1/help/rm.shtml _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
geolez
Joined: 26 Apr 2007 Posts: 9
|
Posted: Sat Apr 28, 2007 4:18 pm Post subject: Cool Info, Thanks! |
|
|
As i opened up the txt file for the Colsat 8000 that i downloaded from the first link. I opened it up in RM and i get an error message "The upgrade you are trying to import is not valid! It does not contain a value for Remote.name"
In the mean time i will keep reading!
Thanks for your help!
George |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Sat Apr 28, 2007 4:39 pm Post subject: |
|
|
Sorry, you are correct, that isn't a valid file. I didn't actually open it before now so I didn't know. The user who created obviously didn't know what they were doing.
I will try reverse engineering it into something that you can use. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
geolez
Joined: 26 Apr 2007 Posts: 9
|
Posted: Sat Apr 28, 2007 5:09 pm Post subject: thanks rob! |
|
|
Thanks Rob I really appreciate it! If you can great if not then I will try to page that guy with it! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Sat Apr 28, 2007 6:44 pm Post subject: |
|
|
Unfortunately, I can't do much with the upgrade she posted because I have no idea what remote it was intended for. The main problem is that the upgrades uses a digit table entry, so I need to know the remote in order to get the correct codes for the numeric buttons.
What I can tell you from the upgrade is that it uses the NEC1 protocol with a main device code of 64 and a sub-device code of 64.
The few EFCs that I can reliably get from the upgrade are:
120 vol+
244 vol-
052 mute
038 ch+
043 ch-
some more EFCs that will do something, but I don't know what, are:
055,056,168,165,167,121,247,059,054,117
You could try starting an upgrade with that info to see if it plays out. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
geolez
Joined: 26 Apr 2007 Posts: 9
|
Posted: Sat Apr 28, 2007 8:51 pm Post subject: Will Try! |
|
|
Appreciate your help Rob. I also paged MISTRESS you posted that file and she said that she sent you an updated and correct file so i will wait for that before i proceed. Thanks again Rob for your time my man! George |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Sat Apr 28, 2007 9:16 pm Post subject: |
|
|
She emailed me the file and I have replaced here old file with it. However, this file generates a different upgrade to the one that was posted previously, as this one uses NEC1 device 1, so I don't know which is right. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
geolez
Joined: 26 Apr 2007 Posts: 9
|
Posted: Sat Apr 28, 2007 10:45 pm Post subject: No Avail! |
|
|
Thanks for everything Rob! I tried opening the new file in RM and all worked well. Exported a bin file and loaded in my sbvg slingbox folder proceeded to the next few steps but OF NO AVAIL. It looks like i have to get a j1 remote , a cable and start from scratch. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Sat Apr 28, 2007 11:10 pm Post subject: |
|
|
She just emailed me back and said that it does use the 64.64 device codes after all, so go back to the RM file that you created and change both the device code and sub-device code to 64 and try it again. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
geolez
Joined: 26 Apr 2007 Posts: 9
|
Posted: Sun Apr 29, 2007 9:58 am Post subject: Tried 64 64 no luck! |
|
|
Once again Rob thanks for your help my man! Prompt responses all the time! When i open RM i get error messages and when i press ok the list of error messages go away and RM opens. When i open her file it asks me to chose between "fake rdf" or "SlingBox with UEI JU chip". This is what i chose because i know i have a Ju based on the reading from the above links. I put a description down and I call it Coolsat 8000. I changed the device and subdevice protocol to 64. I did not change anything else assuming that the Keys programmed will work. I just exported binary file from that and loaded it in my slingbox SBAV folder as S1554. i went through the slingbox set up typed in S1554 PRESSED power and nothing happened. Hmmm maybe i need to start from scratch with JP1 cable and so on. |
|
Back to top |
|
|
|