JP1 Remotes

dean B · Joined: 15 Oct 2006 Posts: 2

Hello, I've been programming my remotes via JP1 for quite some time and until now I haven't had any problems. I recently purchased a URC-8820 and cable from Rob (Thanks!) because my 8910 died. I have successfully put in all my upgrades I had with the 8910 with no problems, EXCEPT... now I'm attempting to add the streamzap upgrade (streamzap-rob) with RM. I am getting the following message:

mr_d_p_gumby · Posted: Mon Oct 16, 2006 10:27 am Post subject:

The protocol upgrade in that file is written for remotes that use an S3C80 processor (such as the 8910). The 8820 is one of the newer JP1.2 remotes that use an HCS08 processor. We are still in the process of creating support for the JP1.2 remotes, and at this time there is no Streamzap protocol available for the 8820.
_________________
Mike England

JP1 Group at Yahoo!, JP1 Files Area

johnsfine · Posted: Mon Oct 16, 2006 10:33 am Post subject:

I assume I'm the one who ought to write that 8820 executor (as usual assuming no one gets the official one from UEI sooner).

That reminds me I never finished the last one of these I started. I wrote, tested and posted the executor but I never made the changes to protocols.ini (and for that one DecodeIR and MakeHex changes are also required).

I'll try to remember to find the time for 8820 Streamzap.