View previous topic :: View next topic |
Author |
Message |
yarix
Joined: 02 Oct 2006 Posts: 3
|
Posted: Mon Oct 02, 2006 3:48 am Post subject: Decode Graetz DVD model AV690 (from winLirc) |
|
|
Hi Everyone,
I have a Force RC that I got from the cables company in Israel. the remote have a JP1 connector and I'm able to communicate with the computer.
In the last 3 days, I've been trying to create teach the remote how to control my DVD player "Greatz AV690".
I've captured many some signals of the DVD remote with WinLirc:
Code: | [color=green]
#
# this config file was automatically generated
# using WinLIRC 0.6.5 (LIRC 0.6.1pre3) on Sun Oct 01 12:23:25 2006
#
# contributed by Yarix
#
# brand: GREATZ_DVD_AV690
# model: AV690
# supported devices:
#
begin remote
name GREATZ_DVD_AV690
bits 16
flags SPACE_ENC
eps 25
aeps 100
header 9009 4553
one 552 572
zero 552 1681
ptrail 552
repeat 8986 2298
pre_data_bits 16
pre_data 0xFF00
gap 39831
toggle_bit 0
begin codes
1 0x0000000000006F90
2 0x0000000000005FA0
3 0x0000000000007F80
Play 0x00000000000015EA
Prev 0x000000000000857A
Next 0x000000000000A55A
Stop 0x00000000000005FA
Pause 0x00000000000025DA
Menu 0x000000000000758A
Rev 0x000000000000956A
Fwd 0x000000000000B54A
Title 0x000000000000659A
Display 0x000000000000DF20
OpenClose 0x000000000000FF00
StandBy 0x000000000000CF30
end codes
end remote
[/color] |
my question is: Do you recognize this code? does anyone have an upgrade file for that remote?
Additional information that I have is from the "learned signals" tab in IR.exe:
for example for the "Play" learned signal I get this:
Protocol: NEC1
Device: 0
SubDevice:
OBC: 87
Hex Cmd: 15
EFC: 106
Misc:
-------------------------
Raw Data:
Frequency: 38277
Sent Once Key Is Pressed:
+9002 -4498 +550 -574 +550 -574 +550 -574 +550 -574 +550 -574 +550 -574 +550 -574 +550 -574 +550 -1700 +550 -1700 +550 -1700 +550 -1700 +550 -1700 +550 -1700 +550 -1700 +550 -1700 +550 -1700 +550 -1700 +550 -1700 +550 -574 +550 -1700 +550 -574 +550 -1700 +550 -574 +550 -574 +550 -574 +550 -574 +550 -1700 +550 -574 +550 -1700 +550 -574 +550 -1700 +550 -40514 +9002 -2266 +550 -96716
Sent Repeatedly While Key Is Being Held:
+9002 -2266 +550 -96716
--------------------------------------------------------
I hope the information is enough to "hack" the codes for the DVD.
Thank you very much!! |
|
Back to top |
|
|
yarix
Joined: 02 Oct 2006 Posts: 3
|
Posted: Mon Oct 02, 2006 5:26 am Post subject: additional info |
|
|
I noticed that the HexCmd in IR.exe is the first 2 digits form the winlirc codes.
for example play\prev in winLirc :
Code: |
Play 0x00000000000015EA
Prev 0x000000000000857A
|
and the play\prev in IR.exe "learned signals":
Code: |
Protocol | Device | SubDevice | OBC | Hex Cmd | EFC
NEC1 | 0 | | 87 | 15 | 106
NEC1 | 0 | | 94 | 85 | 230
|
notice that the hex code is the same for play=15, and prev=85. it's the same for all other buttons.
how do i get the OBC and EFC codes? what are they?
BTW in another session of learning, most of the learned signals did not had a protocol line at all, few had protocols like that:
Code: | Protocol | Device | SubDevice | OBC | Hex Cmd | EFC | Misc
Gap-550-1357-28? | 240 | 63 | 188 | | | F0.3F.C4.B |
|
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Mon Oct 02, 2006 7:01 am Post subject: |
|
|
You don't need LIRC, nor any of that Frequency and Raw data from IR. If you have a JP1 cable (it appears that you do) and IR.exe (it also appears that you do), you have all you need in your hands.
Have you read the JP1 for beginner's sticky posts? (linked in my sig below)
The decode data (NEC 1, Device 0, and OBC values) is all you need to build your own upgrade using either Keymap Master or RemoteMaster.
Read the readme's, pick your program and then come back with specific questions if you still have trouble.
The Gap decodes indicate that one or both of your batteries are getting low. The consistent NEC decodes are correct. _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Mon Oct 02, 2006 7:24 am Post subject: Re: additional info |
|
|
yarix wrote: | I noticed that the HexCmd in IR.exe is the first 2 digits form the winlirc codes. |
That is not a general rule for LIRC. But for a specific device, once LIRC sets it up that way, that will be true for the rest of the functions.
yarix wrote: | how do i get the OBC and EFC codes? |
If you use (RM) RemoteMaster to create the upgrade (rather than KM) you can type in any one of HexCmd, EFC or OBC and RM will compute the other two. So that LIRC data (for each button) plus the decode info of NEC1 protocol, device 0 (from any one correctly learned button) is enough to build an upgrade.
Capn Trips wrote: | The Gap decodes indicate that one or both of your batteries are getting low. The consistent NEC decodes are correct. |
I don't think that Gap decode would occur from low batteries. More likely it is from moving the remote as you press the button to be learned. But anyway it is a bad learn. If you didn't have the LIRC data to use instead, you would need to redo the learns for any buttons for which you don't have an NEC decode. |
|
Back to top |
|
|
Guest
|
Posted: Mon Oct 02, 2006 8:56 am Post subject: Thanks for the reply, I will update the forum... |
|
|
Thank you for the quick response, by the time I notice the response I created a map between Lirc and IR learned signals.
So actually my remote controls the DVD (Greatz AV690), but I'd like to do an upgrade.
I will try to create upgrade from that, and post it here, if it works....
Code: |
Protocol | Device | Sub-Device | OBC | Hex Cmd | EFC | Misc | WinLirc Cmd
NEC1 | 0 | | 12 | CF | 052 | | StandBy CF30
NEC1 | 0 | | 6 | 6F | 057 | | 1 6F90
NEC1 | 0 | | 5 | 5F | 184 | | 2 5FA0
NEC1 | 0 | | 1 | 7F | 185 | | 3 7F80
NEC1 | 0 | | 75 | 2D | 043 | | 4 2DD2
NEC1 | 0 | | 71 | 1D | 170 | | 5 1DE2
NEC1 | 0 | | 67 | 3D | 171 | | 6 3DC2
NEC1 | 0 | | 74 | AD | 039 | | 7 AD52
NEC1 | 0 | | 70 | 9D | 166 | | 8 9D62
NEC1 | 0 | | 66 | BD | 167 | | 9 BD42
NEC1 | 0 | | 73 | 6D | 041 | | 0 6D92
NEC1 | 0 | | 15 | 0F | 058 | | setup 0FF0
NEC1 | 0 | | 68 | DD | 164 | | up DD22
NEC1 | 0 | | 72 | ED | 037 | | down ED12
NEC1 | 0 | | 76 | CD | 036 | | left CD32
NEC1 | 0 | | 64 | FD | 165 | | right FD02
NEC1 | 0 | | 6 | 9F | 182 | | enter 9F60
NEC1 | 0 | | 87 | 15 | 106 | | Play 15EA
NEC1 | 0 | | 94 | 85 | 230 | | Prev 857A
NEC1 | 0 | | 90 | A5 | 231 | | Next A55A
NEC1 | 0 | | 95 | 05 | 234 | | Stop 05FA
NEC1 | 0 | | 91 | 25 | 255 | | Pause 25DA
NEC1 | 0 | | 81 | 75 | 105 | | Menu 758A
NEC1 | 0 | | 0 | FF | 181 | | OpenClose FF00 |
|
|
Back to top |
|
|
yarix
Joined: 02 Oct 2006 Posts: 3
|
Posted: Mon Oct 02, 2006 2:10 pm Post subject: upgrade done :) |
|
|
Thanks johnsfine, Capn Trips.
I've completed the upgrade of the remote. i Used the KM excel.
is there a file that I should upload for other people with such problematic DVD?
I guess that with the above table everyone can create an upgrade... |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Mon Oct 02, 2006 4:09 pm Post subject: |
|
|
You should upload your KM file to the appropriate area of the File Section>Device upgrade files>DVD (linked near the top of this page). _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
|