View previous topic :: View next topic |
Author |
Message |
stacker
Joined: 27 Jul 2006 Posts: 23 Location: the Netherlands |
Posted: Thu Jul 27, 2006 2:37 pm Post subject: Kreatel 1760 STB |
|
|
Hi @all,
I'm using PAL Slingbox and I want to create a remote for the Kreatel 1760 STB. I am a noob at this JP1, although UE (one4all NL) is practically my neighbour
I've done some reading and I wonder if I am correct: I want to try and read the official remote codes with Girder and a Toshiba Remote control receiver (USB, recognized by XP as Microsoft eHome IR transceiver).
I hope to be able to convert to a bin that I can flash in my Slingbox using the new RDF for IRblaster V4.
Am I sort of on track?
Kind regards..stacker |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21279 Location: Chicago, IL |
Posted: Thu Jul 27, 2006 3:56 pm Post subject: |
|
|
That way might work, but it would depend on whether you can get some usable information about the learned signals using those tools.
Do you have any One For All learning remotes? If not, could you get one from your neighbour? If so, then all you would need is a JP1 cable, that you could either make yourself or you could buy from one of the JP1 vendors (and most of them do ship internationally).
With a learning JP1 OFA remote, you could learn the signals from the OEM remote and then use JP1 to decode them. You would then use the decoded info to build the Slingbox upgrade.
Alternatively, you could try calling the OFA CS folks there in the NL to see if they already have a code for this device. If you're able to get a code number from them, please post it here and I'll see if I can track down the specifics. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
stacker
Joined: 27 Jul 2006 Posts: 23 Location: the Netherlands |
Posted: Thu Jul 27, 2006 6:04 pm Post subject: |
|
|
Hi,
do you have one learning OFA to send to NL, a cheapo, asap? For what I read they charge a lot in europe, or is that info outdated..
tnx |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21279 Location: Chicago, IL |
Posted: Thu Jul 27, 2006 7:24 pm Post subject: |
|
|
No, I believe it's still the case. From what I hear, European OFA remotes are expensive. I can send you a URC-8910 and JP1 cable for $46.50 USD total shipped (that's about 36 Euro). _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
stacker
Joined: 27 Jul 2006 Posts: 23 Location: the Netherlands |
Posted: Fri Jul 28, 2006 3:20 am Post subject: |
|
|
Hi,
I would just need the 8910.. How much is that, incl shipping, and how do I get the money to you?
..tnx |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Fri Jul 28, 2006 7:28 am Post subject: |
|
|
The first post in the first sticky thread in the Marketplace section of the forum provides all of the details. _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
stacker
Joined: 27 Jul 2006 Posts: 23 Location: the Netherlands |
Posted: Wed Aug 09, 2006 2:42 pm Post subject: |
|
|
Dunno, I am so far that I learned some codes from my device remote and transferred them into ir.exe.
Most of the buttons are showing: Phase Encoded (RC-Type) . From the howto posted on the SlingCommunity I read that I have to find similar Protocol in RM's setup tab. But, I don't see that Protocol in the pulldown.
What should i do in RM?
PS i use RM1.61 since I couldn't get 1.63 to work, somehow. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21279 Location: Chicago, IL |
Posted: Wed Aug 09, 2006 4:33 pm Post subject: |
|
|
It's possible that you have come across a signal that IR.exe doesn't know how to decode. Therefore, you should learn as many buttons as possible and then post your IR file in the Diagnosis Area for one of us to look at. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
stacker
Joined: 27 Jul 2006 Posts: 23 Location: the Netherlands |
Posted: Thu Aug 10, 2006 6:39 pm Post subject: |
|
|
I uploaded a ir file to the diagnosis area. It's named Kreatel...
tnx... |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21279 Location: Chicago, IL |
Posted: Thu Aug 10, 2006 8:37 pm Post subject: |
|
|
PLease post a link to your file here, or it's unlikely anyone will bother to go searching for it. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
stacker
Joined: 27 Jul 2006 Posts: 23 Location: the Netherlands |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21279 Location: Chicago, IL |
Posted: Fri Aug 11, 2006 12:06 pm Post subject: |
|
|
The '0' button was too badly learned for me to be able to figure out the signal, but here's what I got for the rest of them...
freq=55.555
0 = -320 +320
1 = +320 -320
leadin: n/a
leadout: 85320
Code: | 10100101 0000000 00000010 -85326 10100101 0000001 00000010 -85326 1
10100101 0000000 00001010 -85326 10100101 0000001 00001010 -85326 2
10100101 0000000 00000110 -85314 10100101 0000001 00000110 -85314 3
10100101 0000000 00001001 -85338 10100101 0000001 00001001 -85338 4
10100101 0000000 00001010 -85314 10100101 0000001 00001010 -85314 5
10100101 0000000 00001101 -85336 10100101 0000001 00001101 -85336 6
10100101 0000000 00001110 -85314 10100101 0000001 00001110 -85314 7
10100101 0000000 00010001 -85338 10100101 0000001 00010001 -85338 8
10100101 0000000 00010010 -85314 10100101 0000001 00010010 -85314 9
10100101 0000000 00011001 -85342 10100101 0000001 00011001 -85342 up
10100101 0000000 00011010 -85314 10100101 0000001 00011010 -85314 down
10100101 0000000 00011101 -85338 10100101 0000001 00011101 -85338 left
10100101 0000000 00100001 -85338 10100101 0000001 00100001 -85338 right
10100101 0000000 00100110 -85314 10100101 0000001 00100110 -85314 prev
10100101 0000000 00101101 -85336 10100101 0000001 00101101 -85336 guide |
_________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Last edited by The Robman on Tue Aug 15, 2006 4:36 pm; edited 1 time in total |
|
Back to top |
|
|
stacker
Joined: 27 Jul 2006 Posts: 23 Location: the Netherlands |
Posted: Fri Aug 11, 2006 1:15 pm Post subject: |
|
|
Awesom Rob.. I'll try these and also learn a couple more that I would need, including the '0' and try to make a European Sling file from it.. Later..
tnx again |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21279 Location: Chicago, IL |
Posted: Fri Aug 11, 2006 1:45 pm Post subject: |
|
|
Please do learn the rest of the buttons (and use the NOTE box to enter what the real button name is, for the non-standard buttons) and post another IR file.
However, you won't be able to create an upgrade until somebody writes a new executor to replicate this signal. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
stacker
Joined: 27 Jul 2006 Posts: 23 Location: the Netherlands |
Posted: Sun Aug 13, 2006 3:30 pm Post subject: |
|
|
OK,
I'll learn now, and post asap.. tnx
Does anyone take the effort in building such executors then? If so, and I assume, another complement for this board and the support that everybody gives..
How do I append newly learned signals to an earlier readout from the remote in ir.exe? Otherwise I'll end up with 15 keys per file for diagnosis (thats about how many my learning remote takes) |
|
Back to top |
|
|
|