JP1 Remotes

saphir · Joined: 15 Sep 2005 Posts: 14

i tried to upload an upgrade in my URC-7560 and now any of the key on the remote aren't responding...

no blink ...

i tried to change de battery .. nothing

what can i do ?

The Robman · Posted: Thu Sep 29, 2005 2:17 pm Post subject:

Check that you don't have any buttons trapped under the casing in the "pressed" position.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

saphir · Joined: 15 Sep 2005 Posts: 14

I use IR and initialize to $FF and now i can use the remote.

But there is one thing i don't understand.

I have made a device upgrade with Key master (i tried with RM too), when i upload this upgrade in my remote i 'm not able to use my remote (like i described in my first message)

why ?

gfb107 · Expert Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC

Upload your IR file with the installed upgrade to the Diagnosis Area, then come back here and post a link to it. We can then see exactly what you've done. While you're at it, you might as well upload your save KM or RM file as well.
_________________
-- Greg
Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST)

saphir · Joined: 15 Sep 2005 Posts: 14

Maybe my upgrade is faultly but there is something i can't understand at all.

I tried to upload in my remote another upgrade, a ready made for the kiss dp500 i found here.

This file was for another remote (URC 8560) i changed the urc type to mine with RM and i upload the file in my remote with IR ... same problem, after i was not able to use my URC-7560.

What can be the solution ? i read all the beginner guide without success !

The Robman · Posted: Fri Sep 30, 2005 7:19 am Post subject:

If you do what was already asked, maybe we can help, but if you don't, we can't.

saphir · Joined: 15 Sep 2005 Posts: 14

Thanks a lot for your proposition but i succeed now.
I have reset my remote with 981 and all is working fine.

I have made device upgrade "remote master" file for :

- Plasma Samsung PS42D5S (european model) - 1249 code
- Philips VR500 VCR - 1081 code
- Sagem VM5 = Noos cable operator - 1005 code
- Kiss DP1000 DVD player - 0841 code

Is it usefull if i upload thoses files here ?

The Robman · Posted: Sun Oct 02, 2005 8:45 am Post subject: