View previous topic :: View next topic |
Author |
Message |
silron1
Joined: 04 Nov 2003 Posts: 95 Location: Manchester - UK |
Posted: Tue Nov 18, 2003 2:41 am Post subject: Code for VCR Sony SLV-700 |
|
|
Have searched but cannot seem to find a file for this, rather old (1995), vcr.
I have tried learning and transferring to km but some of the buttons seem to have 2 or 3 lines of of protocol device code. Am away for 10 days - will look further when I return.
Had some problems with stale batteries on the original remote and possibly on the URC 8060 (overwork!!!) which may be giving me the probs. Anomolies after downloading to IR, are eg digit 8 has a double line input against all other digits with one line |
|
Back to top |
|
|
usblipitor
Joined: 10 Oct 2003 Posts: 516 Location: Greenbelt, MD |
Posted: Tue Nov 18, 2003 2:49 am Post subject: |
|
|
perhaps you may be holding down the button too long when learning it?
try this: just peck the button on the original remote when learning it to your learning remote. then check to see if it was learned correctly. For some stupid reason, the manual that comes with the learning remote usually says to hold the button down for 2 seconds, but this is usually unneeded and actually makes the learned button waste valuable memory, and makes it harder for JP1ers to interpret in IR.
(having said that, I am a newbie and may be completely wrong) _________________ -Steve
Beginner's Guide
CodeSearchFAQ
JP1Files |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Tue Nov 18, 2003 6:10 am Post subject: |
|
|
The correct learning technique is to hold the teaching remote button down until the learning remote indicates that the learning process is complete. There are exceptions to this rule, such as with IR keyboards, but it's the correct approach for Sony devices.
Stale batteries are almost certainly the problem here. Put fresh batteries in both remotes and re-try.
Also, I don't think there's a Sony code out there that RobH hasn't listed on his site, so if you can't get the info using learning, visit here:
http://www.anycities.com/rhm5757/sony_home.htm _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Last edited by The Robman on Tue Nov 18, 2003 10:17 am; edited 1 time in total |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Tue Nov 18, 2003 6:58 am Post subject: |
|
|
usblipitor wrote: | For some stupid reason, the manual that comes with the learning remote usually says to hold the button down for 2 seconds, but this is usually unneeded and actually makes the learned button waste valuable memory, and makes it harder for JP1ers to interpret in IR.
(having said that, I am a newbie and may be completely wrong) |
At least mostly wrong, sorry.
A long press normally makes the learning remote learn the repeat pattern of the signal. That has the double advantage that the remote then knows the repeat pattern (what to do when the button is held) and it usually takes LESS space since it stores just one copy of the content to be repeated.
A short press learns exactly what is sent in that time, which is often two copies of the repeat pattern (it takes more than two copies to recognise the pattern). |
|
Back to top |
|
|
|