View previous topic :: View next topic |
Author |
Message |
throgm
Joined: 29 Sep 2003 Posts: 12
|
Posted: Sun Dec 28, 2003 2:21 am Post subject: 2116 Device type change |
|
|
I just installed the extender (2) for the first time partly because I read that I can change what displays on the LCD for a device. I put my Tivo on the AUX key and was able to change the LCD to display "VCR" just using KeymapMaster and IR. I would like to change it to read "TIVO". I interpreted what I read that I can do that but I can't figure it out. I'm still really green when it comes to JP1. So, will the extender allow me to do that? Or am I just limited to what's stored in the remote?
Thanks and apologies if this question has already been addressed. I did a search but I might have used the wrong criteria. |
|
Back to top |
|
|
usblipitor
Joined: 10 Oct 2003 Posts: 516 Location: Greenbelt, MD |
Posted: Sun Dec 28, 2003 7:45 am Post subject: |
|
|
Read the file "CustomModeName.txt" that comes bundled with extender_2 for your remote. It will make it easy for you.
Basically, the extender comes with a special protocol to set the LCD.
You invoke the special protocol by defining a keymove for a placeholder device which uses the special protocol. The hex data for the keymove defines what the LCD screen should display.
You can do 5 chars on line1 and 4 chars on line2 of the LCD.
Happy Holidays, _________________ -Steve
Beginner's Guide
CodeSearchFAQ
JP1Files |
|
Back to top |
|
|
throgm
Joined: 29 Sep 2003 Posts: 12
|
Posted: Sun Dec 28, 2003 10:50 am Post subject: |
|
|
Hey .. what do you know? The information I needed was right there in the manual. I just may have to open the books that come with devices I buy to see what I can uncover. This is like a whole new beginning.
Thanks, man! |
|
Back to top |
|
|
usblipitor
Joined: 10 Oct 2003 Posts: 516 Location: Greenbelt, MD |
Posted: Sun Dec 28, 2003 12:08 pm Post subject: |
|
|
throgm wrote: | I just may have to open the instruction manuals that come with devices I buy. | This is the first step down a road you do not want to be on. Soon you will have the urge to ask driving directions at the first sign of being lost, and you may start to watch the Home and Garden channel. Shortly after this, your penis will fall off.
________________
Got JP1?
-Steve |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Sun Dec 28, 2003 12:15 pm Post subject: |
|
|
usblipitor wrote: | throgm wrote: | I just may have to open the instruction manuals that come with devices I buy. | This is the first step down a road you do not want to be on. Soon you will have the urge to ask driving directions at the first sign of being lost, and you may start to watch the Home and Garden channel. Shortly after this, your penis will fall off. |
Is that the voice of experience talking, Steve? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
throgm
Joined: 29 Sep 2003 Posts: 12
|
Posted: Sun Dec 28, 2003 12:16 pm Post subject: |
|
|
That's it then. In the trash they go as always.
But I have a whole new problem now. Before Ext2, I had a macro for FFWD to send 2 FFWDs. After Ext2 it just sends continuous FFWDs and I have to take out the batteries to stop it. I read .. yes, I said "I read" the .txt files that came with the extender and tried what I deciphered from them (i.e. creating a macro on a phantom key then adding a key move using the hex value for that phantom key .. and I assume the MISC/1103 protocol). That didn't work for me. If I just delete and recreate the macro like I did initially, it just sends continuously. All I want is FFWD to send FFWD;FFWD. How do I do this now? |
|
Back to top |
|
|
usblipitor
Joined: 10 Oct 2003 Posts: 516 Location: Greenbelt, MD |
Posted: Sun Dec 28, 2003 12:20 pm Post subject: |
|
|
stick in a hex code for a key that does not have any function, keymove, or macro on it, like shift-move, in between the two ffwards.
upload your IR.exe to diagnostics folder if that fails and someone will look at it.
the extenders drastically reduce the delay between keys in macros and therefore you may have to add a delay. also read the readme about adding a short, medium, and long delay. there is a delay protocol also.
what is probably happening is your IR receiver on the device is not ready to accept the second ffward as it is too close to the first one.
if there are other things going on in the macro, like turning a different device off or on or something, try putting that in between the two ffwards. |
|
Back to top |
|
|
throgm
Joined: 29 Sep 2003 Posts: 12
|
Posted: Sun Dec 28, 2003 12:46 pm Post subject: |
|
|
Okay .. I uploaded 2116 with Ext2-TEST.txt in the diagnosis area. I just don't get it. Before uploading, I reverted it back to how the macro was set up before Ext2. |
|
Back to top |
|
|
usblipitor
Joined: 10 Oct 2003 Posts: 516 Location: Greenbelt, MD |
|
Back to top |
|
|
throgm
Joined: 29 Sep 2003 Posts: 12
|
Posted: Sun Dec 28, 2003 1:13 pm Post subject: |
|
|
Sorry to report that it still sends continuous FFWDs. Without Ext2, the macro works fine. It definitely has something to do with the extender. But what? |
|
Back to top |
|
|
usblipitor
Joined: 10 Oct 2003 Posts: 516 Location: Greenbelt, MD |
Posted: Sun Dec 28, 2003 1:18 pm Post subject: |
|
|
I guess we need an expert. |
|
Back to top |
|
|
throgm
Joined: 29 Sep 2003 Posts: 12
|
Posted: Sun Dec 28, 2003 1:24 pm Post subject: |
|
|
Is that something we have to order? Or will one just pop in unexpectedly? |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Sun Dec 28, 2003 1:41 pm Post subject: |
|
|
In the extender, FFWD;FFWD will just keep calling itself, hence the endless loop. Create a key move on Shift-FFWD that is the FFWD command. Then the macro on the FFWD key would be Shift-FFWD;Shift-FFWD. _________________ Mark |
|
Back to top |
|
|
usblipitor
Joined: 10 Oct 2003 Posts: 516 Location: Greenbelt, MD |
Posted: Sun Dec 28, 2003 2:12 pm Post subject: |
|
|
mark,
couldnt you also just use shift-cloaking and not create a keymove on shift-fwrd with fward on it? my concern is that this will also wind up calling itself. _________________ -Steve
Beginner's Guide
CodeSearchFAQ
JP1Files |
|
Back to top |
|
|
usblipitor
Joined: 10 Oct 2003 Posts: 516 Location: Greenbelt, MD |
|
Back to top |
|
|
|