JP1 Remotes

coalminecanary · Joined: 23 Feb 2007 Posts: 1

Hey there,
I can get everything to work on my URC-6800 except learning. Setup-975 gives me one long flash. Does this mean that the learning memory is full? I may have filled this remote with codes a long time ago... I have not used it in a while, and now I am using it in a different room. I'm wondering what the best steps are to try now. The remote has fresh alkalines.
Thanks!

Capn Trips · Expert Joined: 03 Oct 2003 Posts: 3990

If the remote has nothing of value programmed, do a 981 (or MFR) reset. This will clear everything in every memory, and restore all factory defaults.

If it DOES have something of value, and you have a cable, save your IR image and THEN do the 981 reset.

Try learning then.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!

Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)