Page 1 of 1
Onkyo TX-NR901 receiver and RC-549M remote JP1 remote?
Posted: Thu Jul 22, 2004 8:19 am
by iskowitzsa
has anyone had any dealings with the above item. The remote seems to be capable of using JP1 software (has connector). its seems to be a full function RF and learning remote for the TX-NR901 receiver. This is my son's new toy and wonder how to get it to work with JP!. thanks in advance Stu
Posted: Thu Jul 22, 2004 9:25 am
by The Robman
If it has the connector, try downloading the memory and see what happens.
Onkyo RC549M remote file
Posted: Fri Jul 23, 2004 2:40 pm
by iskowitzsa
Thanks Rob I was able to download the memory of the remote using one of my cables ( don't know why other didn't work but another problem)...
placed it in the Diagnostic area of the Yahoo group site. any help would be appreciated . Thanks Stu
Posted: Fri Jul 23, 2004 3:56 pm
by Mark Pierson
I took a look at your
file. FYI, it's usually best to post a link to the file (after reading the
Posting Links message) so that people can find it quickly without having to search for it.
My first guess is that it's NOT a JP1 remote since the EEPROM data seems strange to say the least. Even the typical signature bytes are weird: 03 04 18 FF 01 47 01 FF
If it is a JP1 remote, it might be one with the new EEPROM format that Rob has mentioned, but since I've never seen one of them, I can't say for sure.
Posted: Fri Jul 23, 2004 9:14 pm
by iskowitzsa
Sorry about not posting the Yahoo link hadn't read the posting file before
it would be
http://groups.yahoo.com/group/jp1/files ... ea/RC-549M Onkyo remote.zip
or the shorter one you had in your post ( have to try that later.)
Guess I was wrong thanks for looking at the file. Stu