View previous topic :: View next topic |
Author |
Message |
DPE
Joined: 05 Oct 2003 Posts: 10 Location: Austin, Tx |
Posted: Sun Oct 05, 2003 5:49 pm Post subject: Automation Systems RC-2205 Upgrade |
|
|
I'm using a URC-9910 remote and would like to implement the extender for this remote. I currently am using only one learned signal, and would like to create an upgrade for it in order to use it with the extender.
I have had to learn the command to control an in-wall IR light switch. The switch is manufactured by Automation Systems (http://www.automation.com.hk) . The command works in the following manner. A quick press and release of the button will toggle the light on and off. Pressing and holding the button will cause the light to dim down/up.
The IR.exe decodes the the quick press and release as:
+1266 -424 +422 -1268 +422 -1268 +1266 -424 +422 -1268 +422 -1268 +422 -1268 +422 -1268 +422 -1268 +1266 -424 +422 -1268 +422 -35084 +1266 -424 +422 -1268 +422 -1268 +1266 -424 +422 -1268 +422 -1268 +422 -1268 +422 -1268 +422 -1268 +1266 -424 +422 -1268 +422 -130648
This data is in the top decode pane ("Sent once when key is pressed")
A button hold is decoded as:
+1254 -418 +418 -1272 +418 -1272 +1254 -418 +418 -1272 +418 -1272 +418 -1272 +418 -1272 +418 -1272 +1254 -418 +418 -1272 +418 -35342 +1254 -418 +418 -1272 +418 -1272 +1254 -418 +418 -1272 +418 -1272 +418 -1272 +418 -1272 +418 -1272 +1254 -418 +418 -1272 +418 -89624
This data is in the middle decode pane ("Sent repeatedly while key is being held").
The reported frequency is 37914.
Thanks in advance for any help/suggestions!
-Dave |
|
Back to top |
|
|
jon_armstrong Expert
Joined: 03 Aug 2003 Posts: 1238 Location: R.I.P. 3/25/2005 |
Posted: Sun Oct 05, 2003 8:15 pm Post subject: |
|
|
I'm pretty sure that is the F12 protocol and it can do either behavior with a control bit.
Make sure you have downloaded the latest version of IR AND DecodeIR.dll copied to the windows\system folder and it should decode.
If you have a problem just post it to the diagnosis section and I 'll take a look when you let me know it is there. _________________ -Jon |
|
Back to top |
|
|
DPE
Joined: 05 Oct 2003 Posts: 10 Location: Austin, Tx |
Posted: Sun Oct 05, 2003 9:10 pm Post subject: |
|
|
Jon,
That was it. Thanks alot!
-Dave |
|
Back to top |
|
|
|