View previous topic :: View next topic |
Author |
Message |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21246 Location: Chicago, IL |
Posted: Tue Feb 23, 2016 5:54 pm Post subject: |
|
|
Dave, could you make a similar file using the Nevo C2, because that would use S3C8 code which I can read? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21246 Location: Chicago, IL |
Posted: Tue Feb 23, 2016 6:05 pm Post subject: |
|
|
Ok, never mind, TV/4485 looks like a winner, as the binary appears to match what I found. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21246 Location: Chicago, IL |
Posted: Tue Feb 23, 2016 6:19 pm Post subject: |
|
|
Carl, could you learn the same Epson button to 4 or 5 different 8820 buttons please, and don't do any additional presses of the Epsom button in between.
The reason I ask is because the binary from the UEI upgrade doesn't exactly match the binary that I got from your learns, and there are 3 bytes of data per button, which is way more than they need, so I'm wondering if there are any toggle bits or anything similar in there. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3368
|
Posted: Tue Feb 23, 2016 7:16 pm Post subject: |
|
|
This protocol has some similarity to DirecTV, but is simpler.
DiIrecTV starts {38k,600,msb}<1,-1|1,-2|2,-1|2,-2>, while Rob's decode starts (I think) 38k,572,msb}<1,-1|1,-2|2,-1|2,-2>. In other words, except for 600 versus 572 uSec, the durations for the signal bits follow the same pattern. In writing a HCS08 executor, I'd probably want to first look at the DirecTV executor. |
|
Back to top |
|
|
Carl
Joined: 15 Jan 2009 Posts: 159 Location: Quebec city, Canada |
|
Back to top |
|
|
Carl
Joined: 15 Jan 2009 Posts: 159 Location: Quebec city, Canada |
Posted: Tue Feb 23, 2016 7:52 pm Post subject: |
|
|
Here's a picture of what the remote looks like:
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21246 Location: Chicago, IL |
Posted: Wed Feb 24, 2016 12:14 am Post subject: |
|
|
Carl wrote: | I have some Atlas 1056 JP2... I will try the codes. |
What's the signature of that remote, is it 30333033? If so, that's a S3F8 remote, which means it can use the executor that's in the last file that Dave posted, which means I can build you an upgrade to try out. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3368
|
Posted: Wed Feb 24, 2016 2:10 am Post subject: |
|
|
Rob, Carl says it is a JP2 remote (presumably the 1056B03). Here's the output from my MAXQ JP2Executor program:
Code: | PID = 025A
33 69 13 98 00 05 16 00 16 00 16 00 2C 00 2C 00 16 00 2C 00 2C 00 46 0B 58 00 16 00 BE 04 00 04 00 00 00 01 C6 54 04 00 00 00 80 10 71 72 73 0C 56 0C D3 01 15 95 95 02 16 D3 D3 FE
Modulation On/Off: 8.50uS/17.50uS; Total: 26.00uS; Frequency: 38.46 KHz
Number of Fixed/Variable Bytes: 1/3
R30-R33 16 00 16 00 Data0 On/Off: 572uS/572uS
R31-R34 16 00 2C 00 Data1 On/Off: 572uS/1144uS
R32-R35 2C 00 16 00 Data2 On/Off: 1144uS/572uS
R33-R36 2C 00 2C 00 Data3 On/Off: 1144uS/1144uS
R40-R41 46 0B LO Off: 75036uS
R42-R45 58 00 16 00 LI On/Off: 2288uS/572uS
R46-R47 BE 04 alt LO Off: 31564uS
Protocol Timing Bytes: 24
Code Spec: 1 = base4;
Signal Block
PF0: C6 [7]: Signal specs have a code block; [4..0]: 7 PF bytes
PF1: 54 [7..6]: Lead-in Every Frm; [4]: Repeat at least 0 times; [2]: On burst before LO;
PF2: 04 [7..5]: Executor Flow: Terminate execution; [4..0]: 4 TX bytes in first signal spec
PF3: 00 [5..0]: 0 Repeats
PF4: 00
PF5: 00
PF6: 80 [7]: Run code block before distributing DCBuf into TX bytes
Signal Spec DCbytesIdx/NumTXBits: 0/2, 1/8, 2/8, 3/8
56 0C D3 01 BRA Z L0, DCbuf3, #01h
15 95 95 02 OR PF1, PF1, #02h
16 D3 D3 FE AND DCbuf3, DCbuf3, #FEh
L0: End Signal Spec Code Block |
So it sends 26 bits: 2 from the fixed data, and 8 each from the command bytes. The least significant bit of the 3rd command byte is inspected to determine if the lead out should be 75 or 31.6mS. This LSB will always be set to zero before transmitting. I suppose that this is structured as 2 bits of unit code, and 23 bits of variable info. |
|
Back to top |
|
|
Carl
Joined: 15 Jan 2009 Posts: 159 Location: Quebec city, Canada |
Posted: Wed Feb 24, 2016 11:25 am Post subject: |
|
|
I have tried the TV/4485 upgrade in my JP2 remote and it is not working.
My signature was 2010A9MAXQXX
Processor: Maxim MAXQ610..
The good news is that, I have a JP1.3 remote on hand with the signature 30333033:
Let me know if you want me to try something.
I still need an upgrade for a URC-8820 but for testing we can use the Atlas 30333033. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
|
Back to top |
|
|
Carl
Joined: 15 Jan 2009 Posts: 159 Location: Quebec city, Canada |
Posted: Wed Feb 24, 2016 12:03 pm Post subject: |
|
|
I can confirm that the upgrade is working with the Atlas, I have tested all the keys.
How do we go from here to make it work on a URC-8820? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21246 Location: Chicago, IL |
Posted: Wed Feb 24, 2016 5:43 pm Post subject: |
|
|
Carl wrote: | I can confirm that the upgrade is working with the Atlas, I have tested all the keys. |
When I get a chance, I will create an upgrade for you that is based on the binary found in your learns, just to verify that those also work. The reason being that only a handful of buttons had the same binary between the UEI upgrade and the captures, the rest had different binary, so I want to confirm that 2 different binaries work the same function. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Carl
Joined: 15 Jan 2009 Posts: 159 Location: Quebec city, Canada |
Posted: Wed Feb 24, 2016 5:48 pm Post subject: |
|
|
Thanx alot Rob. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21246 Location: Chicago, IL |
Posted: Wed Feb 24, 2016 11:32 pm Post subject: |
|
|
Here ya go, this one has all the codes from Dave's upgrade and all the ones from your learns. Where the binary was the same, I labeled it as such.
Primarily there are 2 sets of arrow buttons, the official UEI codes are assigned to the regular arrow buttons, and the learned arrow codes are assigned to the transport keys. Look at the layout or buttons tab in RM and you'll see.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13947 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|