HWTest
Joined: 14 Jun 2005 Posts: 35
|
Posted: Fri Dec 26, 2014 7:28 am Post subject: URC-8060 Kameleon - mixed keys for AUD? |
|
|
I'm trying to configure my old URC-8060 Kameleon. Until now I used only wav upgrades and KeyMagic codes. But now I built a simple interface parallel JP1 cable (1k resistors, 18-25 connected). The cable works for download in IR 8.04, upload gives me errors, so I'm using wav upgrades generated by IR for now and try to troubleshoot that later. RMIR gives an error message when downloading - I'll open another thread for this problem.
Wav upgrades work fine, when I download the upgraded remote and compare with the source, it is the same.
I've created a couple upgrades and tested them on my URC-8210. Then I converted the upgrades for the URC-8060 and loaded them.
The problem is, that some functions under AUD are not under keys where I've set them. For instance the command Power is not under the Power, where I set it but under the Play key. I can create a "map" if it helps to diagnose the problem. So far I have tested two more devices (CD and VCR) and there it is OK, Play executes the command Play etc.
I can post the upgrade files and the remote download, if it helps to diagnose the problem.
What could be the problem - the rdf for the remote?
Edit: All other devices work, also the upgrade works, when I change the type from AUD to SAT. I think it has something to do with the numeric keys being labelled in AUD as input. |
|