Page 1 of 1
Google Fiber Remote with MCE Protocol
Posted: Wed Apr 03, 2013 3:18 am
by Noirfire
Hi,
I'm having a issue with this Google fiber remote I've captrued the keys and it's comeback as;
protocol / Device / Sub Device
MCE / 0 / 116
So I created the Bin file with these codes but have found that I'm getting no response.
I suspect it actcally a RC6-6-32 Protocol and its being picked up incorrectlty. Is anyone able to give me an helping hand to resolve this issue?
Thanks
Phil
Files can be found here;
http://www.hifi-remote.com/forums/dload ... e_id=11822
Posted: Wed Apr 03, 2013 11:09 am
by vickyg2003
Phil,
I can't quite remember your situation. I've been AWOL for a while.
The upgrade you created looks good to me.
What I did see is that the PL-Bin doesn't require an protocol upgrade, so the bin is really small. The only thing I can think of is that the protocols section of the PL RDF might not properly reflect the MCE version. If you are using the PL bin, you might want to edit the RDF and remove the "012A" protocol to force the protocol code to be included in the bin .
Vicky
Posted: Thu Apr 04, 2013 12:30 am
by alanrichey
Is that box going to be available on the Harmony database ? if so I could try a learn as well. I need the Model number.
Might be irrelvant but I have never seen an MCE 0.116 decode but the XBox 360 uses MCE 116.15.
Posted: Thu Apr 04, 2013 9:18 am
by Noirfire
Hey,
Thanks for the replies I try your suggestion Vicky.
Alan sorry but I don't know what the harmony database is could you explain please?
I'll try and find if it has a model number the only details I have been given is [Google Figer].
Cheers
Phil
Posted: Thu Apr 04, 2013 9:44 am
by alanrichey
Sorry, I have a Logitech Harmony Programmable Remote that I can load any device onto to mimic the original Remote.
I just ran a test and although it didn't recgonise 'Google Fiber' it did flag up a Google GFHD100 and that is decoding as MCE 0.116 and the Power button OBC is 12.
Would you like me to produce a Custom Remote and you can see if it works ?
Posted: Wed Apr 10, 2013 2:37 am
by Noirfire
Hi Alan,
If that would be possible that would be great I tried vicky suggestion but it still not working with the STB.
thanks
phil
Posted: Wed Apr 10, 2013 4:03 am
by alanrichey
Posted: Sat Apr 13, 2013 1:36 am
by alanrichey
So what happened ? Did it work ?
Posted: Mon Apr 15, 2013 3:30 am
by Noirfire
Hi Alan
Sorry I will try it today I didn't get a notification email about posts.
Cheers
Posted: Mon Apr 15, 2013 3:46 am
by Noirfire
Hi Alan,
Thats brilliant it works a treat
Cheers
Posted: Mon Apr 15, 2013 3:54 am
by alanrichey
Good, thanks for the feedback, I'll upload it at the weekend.