View previous topic :: View next topic |
Author |
Message |
pH7_jp1
Joined: 14 Sep 2003 Posts: 480 Location: Sterling Heights, MI |
Posted: Tue Jun 24, 2014 12:44 pm Post subject: RMIR External Functions - What am I missing? |
|
|
You can find the RMIR file I am talking about HERE.
Usually it's something obvious and probably is this time as well. I have defined 3 External Functions in the DVD 2013 device - 2 ToadTogs to define an ON and OFF function and a Delay (pause) that is needed between the Play and Stop commands. I made this delay 3 Seconds, just so it was obvious for my initial testing.
If I defined the 2 ToadTogs as Special Functions in the master RMIR file and the Delay in the External Functions of the DVD 2013 device then it worked correctly. Therefore, I believe that I proved that a pause can be defined in the External Functions of the device.
If I then remove the 2 ToadTogs from the Special Functions of the master RMIR file and define them in the External Functions of the DVD 2013 device (as you will see in the indicated file) then the ToadTogs do execute correctly - the Play-Stop commands are sent, or the Power command is conditionally sent as would be expected, but the delay does not happen.
Am I doing something wrong, or am I expecting something to work that isn't supposed to work, or is something wrong? |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Tue Jun 24, 2014 1:22 pm Post subject: |
|
|
I have to say I've never tried to do anything like that with external functions. I don't think it's supposed to work.
I'd do all that stuff on the Special Functions tab rather than try to make it part of your device. |
|
Back to top |
|
|
pH7_jp1
Joined: 14 Sep 2003 Posts: 480 Location: Sterling Heights, MI |
Posted: Tue Jun 24, 2014 1:30 pm Post subject: |
|
|
Yes, that is what I have always done in the past. I thought I would try this, just to keep everything about that device together in one place. It came so close to working, I thought maybe it should. I have already reverted to the way I have always done it before, just to keep things moving. |
|
Back to top |
|
|
|