View previous topic :: View next topic |
Author |
Message |
seb_131
Joined: 20 Mar 2010 Posts: 21
|
Posted: Sat Mar 20, 2010 6:32 pm Post subject: Problem to add Denon Amp in Dreambox V4 remote |
|
|
Hello
great ! I have discovered that I could reprogram my dreambox 7000 remote (V4) and I just finished my JP1.2 serial interface. It works fine with no rework and the download is perfomed without error.
But, my goal was to control the volume of my Denon AMP with the dreambox remote (VPT), but I can't find a way to do it ...
I found 3 devices in my remote eeprom (I have 2 buttons only), so I think it could be possible to add my Denon amplifier. But, it seems not possible to configure the AUX device as a AMP (only TV, SAT or DVD).
Any idea please ? Help would be very appreciated.
Thanks
Cheers
Seb131 |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Sat Mar 20, 2010 9:55 pm Post subject: |
|
|
Change your denon upgrade to a compatible device type (TV, VCR or SAT) in RM (or KM). SAT would probably be best. |
|
Back to top |
|
|
seb_131
Joined: 20 Mar 2010 Posts: 21
|
Posted: Sun Mar 21, 2010 2:38 am Post subject: |
|
|
Thanks for the quick reply.
Good idea, and I will try (so, I have to learn how to use RM first )
There is no problem to use a SAT code for this device as another SAT device will also be used for the Dreambox ?
Cheers
Seb131 |
|
Back to top |
|
|
seb_131
Joined: 20 Mar 2010 Posts: 21
|
Posted: Sun Mar 21, 2010 8:59 am Post subject: |
|
|
Ok, I am completly lost now ...
I don't find DreamboxV4 remote in KM. And in RM after adding the rdf and map file, the DreamboxV4 remote seems to be managed, but everything (code, protocole, buttons...) is empty (except the layout with the picture).
I don't know what I have to do and how to proceed...
Tanks
regards |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Mar 21, 2010 9:35 am Post subject: |
|
|
As you found, KM only handles selected remotes, while RM handles any remote where the RDF has been completed.
In order to use RM, you need to know what the Denon AMP's signal looks like. In the AUDIO upgrade area we have several Denon Upgrades.
If you can't find the exact model number of your Denon AMP, you start experimenting with the KM and RM files you find in the upgrade area. Remotemaster can open files in either format.
Once you open the upgrade, change the remote to the Dreambox V4 remote. Then change the upgrade type to one TV.
Switch to the Buttons TAB.
Make sure the functions are on the buttons that you'd like to see.
Switch to the Output Tab.
Copy the Upgrade and Paste in the Device in IR.
If a Protocol is required, copy that and paste that into IR as well.
Then Upload your IR file to your remote.
Test.
If it doesn't control anything, try another upgrade. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
seb_131
Joined: 20 Mar 2010 Posts: 21
|
Posted: Sun Mar 21, 2010 10:42 am Post subject: |
|
|
Great ! Thank you for your explanations, it works fine (my Denon-AVR1708 is not available, but it worked with the first other one I tried).
Now I will invesitage how to swith to the AUX device using a macro because I have only two device buttons available.
Cheers
Seb131 |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Sun Mar 21, 2010 11:01 am Post subject: |
|
|
If all you want it VPT you don't need to switch to it, you can just set the VPT to the audio device and you're done.
If you do want to be able to switch to AUX device mode, you'll notice that the three device buttons are right at the top of the list of available buttons when you create a macro. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
seb_131
Joined: 20 Mar 2010 Posts: 21
|
Posted: Sun Mar 21, 2010 11:08 am Post subject: |
|
|
The VPT works fine but I want to swith on/off my denon using the same remote. So, using a macro now it works (shift+TV => 3rd device).
Now I would like to know if it is possible to add a 4th device in my remote memory (using protocol and macros ? ) because I can see only 3 slots (I thought it was possible in DreamboxV1/JP1 remote).
Thanks ! |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Mar 21, 2010 12:10 pm Post subject: |
|
|
It is true. Dreambox V4 only has 3 slots, whiel Dreambox V1 had 4 slots.
If there was a multiplexor, that might address your issues. However
I don't think a multiplexor has been written for the Dreambox remote, and haven't heard that anyone has one in the works.
I don't think the Dreambox has a lot of keys, but perhaps you can work this out with keymoves. A keymove will work with devices, even if that device isn't assigned a slot on the Setup page. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Last edited by vickyg2003 on Sun Mar 21, 2010 2:43 pm; edited 1 time in total |
|
Back to top |
|
|
seb_131
Joined: 20 Mar 2010 Posts: 21
|
Posted: Sun Mar 21, 2010 2:14 pm Post subject: |
|
|
No problem, I can control my Amp volume now, it was what I wanted to do.
I built my JP1.2 interfac eyesterday, and in less 24 hours I learnt a lot thank to your helps. Thks a lot !
Now I will play to re-arrange my buttons and check other possibilities.
Cheers
Seb131 |
|
Back to top |
|
|
seb_131
Joined: 20 Mar 2010 Posts: 21
|
Posted: Mon Mar 22, 2010 1:44 pm Post subject: |
|
|
Another question. Is it possible to switch on all my 3 devices using a short press on power key, and to swith off all of them by a long key press (because the Denon off button is different from the on one) ?
thank you
Cheers
Seb131 |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Mon Mar 22, 2010 1:57 pm Post subject: |
|
|
SEB, what you are describing, is what a LKP/DKP special protocol does. The LKP/DKP is a special protocol developed by JP1ers. This function is usually developed when a extender is developed. AFAIK, As far as I know, this special protocol has not been adapted for the Dreambox V4. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
seb_131
Joined: 20 Mar 2010 Posts: 21
|
Posted: Mon Mar 22, 2010 5:42 pm Post subject: |
|
|
Thanks for your quick reply. So I will try using standard macro.
See U |
|
Back to top |
|
|
seb_131
Joined: 20 Mar 2010 Posts: 21
|
Posted: Tue Mar 23, 2010 12:47 pm Post subject: |
|
|
I tried to implement macros in order to switch on my 3 devives using the Power button, and to switch them off using shift+Power conbinaison.
It doesn't work and my remote doesn't respond after pressing Power (I have to remove the batery).
My ir file is here : http://www.zshare.net/download/7408748413d1421b/
Could you help please ?
Thanks !
Cheers
Seb |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Tue Mar 23, 2010 1:38 pm Post subject: |
|
|
Please post HERE in the future.
Your key moves don't make any sense. Delete all of them except AUX Phantom2 and AUX Phantom4. Those are your actual denon discrete on/off's, right?
Power can't have a function and a macro, only one or the other. You're getting into some sort of loop I think. So pick any button for your on macro EXCEPT power.
Then your on macro can be: TV; Power; AUX; Phantom4; DREAM; Power
You off macro: TV; Power; AUX; Phantom2; DREAM; Power |
|
Back to top |
|
|
|