View previous topic :: View next topic |
Author |
Message |
jbollt
Joined: 14 Dec 2003 Posts: 53
|
Posted: Wed Jan 21, 2004 11:48 am Post subject: 1994 macro delay |
|
|
I am using a 1994, and extender 1. Have device key macros, and have discovered the need for the delays, as the TV takes too long to be ready for the input change. Searched forum and found info on delay protocols, and am having trouble getting the delays to take effect in my macro.
Heres what I have done, perhaps I have misunderstood the procedure, or am missing a step?
In IR, I have added:
Upgrade protocol 0 = 01 FB (S3C80)
00 00 01 E4 03 C2 C6 C0 00 00 0A FE 1A FC 2A FA
AF
End
...as a protocol, and:
Upgrade code 0 = 1C 50 (TV/1104)
FB 00 01
End
...as a device.
I have added a key move in IR:
Cbl/Sat Phantom1 <n/a> TV 1104 $30 144. Tried $10 and $20 as well. No delays observed.
Thanks for any and all help...I am taking baby steps... |
|
Back to top |
|
|
Nils_Ekberg Expert
Joined: 02 Aug 2003 Posts: 1689 Location: Near Albany, NY |
Posted: Wed Jan 21, 2004 12:25 pm Post subject: |
|
|
That should work the way you have it but I do have to ask the basic question, did you put the Phantom1 in the macro where you want the delay and is it in a macro that runs in CBL/SAT device mode? _________________ Nils
Files Section
Diagnosis File Section |
|
Back to top |
|
|
jbollt
Joined: 14 Dec 2003 Posts: 53
|
Posted: Wed Jan 21, 2004 12:39 pm Post subject: |
|
|
Thanks Nils! heres the macro: (I assume it runs in CAB/SAT devicce mode. Isn't this macro global?)
VCR button: =
TV;POWER;TV/VIDEO[A/B];SAT;Phantom1;VCR;POWER;TV;TV/VIDEO[A/B];1;VCR
thanks
Jeff |
|
Back to top |
|
|
johann83
Joined: 03 Aug 2003 Posts: 66 Location: Pittsburgh, PA |
Posted: Wed Jan 21, 2004 12:51 pm Post subject: |
|
|
jbollt wrote: | Thanks Nils! heres the macro: (I assume it runs in CAB/SAT devicce mode. Isn't this macro global?)
VCR button: =
TV;POWER;TV/VIDEO[A/B];SAT;Phantom1;VCR;POWER;TV;TV/VIDEO[A/B];1;VCR
|
The macro is global, however the Phantom1 keymove you created for the pause is not. What I think Nils was getting at is that you have to be in CBL/SAT mode for the pause to work by pressing Phantom1. But judging from that macro it looks like you are already doing that. |
|
Back to top |
|
|
Nils_Ekberg Expert
Joined: 02 Aug 2003 Posts: 1689 Location: Near Albany, NY |
Posted: Wed Jan 21, 2004 1:14 pm Post subject: |
|
|
Seems to me that that should work so I don't know why. The only possibility that I can think of is that extender 1 overrides it somehow maybe how it handles registers or something but I am not sure since I don't have the source for the extender.
Since you obviously need the delay, in the interim, try creating a generic pause until we can understand and fix this. Delete the keymove on phantom1 and create a macro on phantom1 with a half dozen or so Shift-Phanto4's in it. It does not matter what button/phantom you use as long as it has nothing defined on it and it is not phantom1 within phantom1. _________________ Nils
Files Section
Diagnosis File Section |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Wed Jan 21, 2004 1:44 pm Post subject: |
|
|
Nils_Ekberg wrote: | Seems to me that that should work so I don't know why. The only possibility that I can think of is that extender 1 overrides it somehow maybe how it handles registers or something but I am not sure since I don't have the source for the extender. |
This particular pause protocol is too generic for any of that to matter. It is compatible with old and new S3C80 remotes with or without any of the extenders.
I also don't spot the problem from the info in this thread.
Jeff, You should post the eeprom image to the diagnosis folder. We may spot something by opening it with IR ourselves that we can't spot from the description.
Nils_Ekberg wrote: |
Since you obviously need the delay, in the interim, try creating a generic pause until we can understand and fix this. Delete the keymove on phantom1 and create a macro on phantom1 with a half dozen or so Shift-Phanto4's in it. It does not matter what button/phantom you use as long as it has nothing defined on it and it is not phantom1 within phantom1. |
I think this thread is about an extender that doesn't allow macro nesting, so the above idea wouldn't work. |
|
Back to top |
|
|
jbollt
Joined: 14 Dec 2003 Posts: 53
|
Posted: Wed Jan 21, 2004 1:48 pm Post subject: |
|
|
"I think this thread is about an extender that doesn't allow macro nesting, so the above idea wouldn't work."
That would explain why the 6 shift/phantom4s didn't work either.
I will upload the EEPROM image and post when I have done that. |
|
Back to top |
|
|
jbollt
Joined: 14 Dec 2003 Posts: 53
|
|
Back to top |
|
|
gfb107 Expert
Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC |
|
Back to top |
|
|
jbollt
Joined: 14 Dec 2003 Posts: 53
|
Posted: Wed Jan 21, 2004 4:44 pm Post subject: |
|
|
I can't seem to get the 'hide the url' part and "click here" part right, but I think the link works. I must just be too dense for this stuff...I am not a programer...I know, I know...patience...and I never give up....sometimes I just need little pointers. I edited the post trying to get the click here 9 times
thanks all
jeff |
|
Back to top |
|
|
Nils_Ekberg Expert
Joined: 02 Aug 2003 Posts: 1689 Location: Near Albany, NY |
Posted: Wed Jan 21, 2004 5:14 pm Post subject: |
|
|
I looked at your IR eeprom dump and I am confused. In an earlier post you said the pause was on CBL/SAT Phantom1 and you had a SAT in the macro before the Phantom1. Looking at your file the Phantom1 keymove is in CBL/SAT but before the Phantom1 in the VCR macro you have AUX1 (3rd line). Since there is nothing on Phantom1 in AUX1 it will not do anything.
Change the AUX1 (line 3) in the VCR macro to CBL/SAT and it should work. _________________ Nils
Files Section
Diagnosis File Section |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Wed Jan 21, 2004 5:19 pm Post subject: |
|
|
jbollt wrote: |
VCR button: =
TV;POWER;TV/VIDEO[A/B];SAT;Phantom1;VCR;POWER;TV;TV/VIDEO[A/B];1;VCR
|
But that isn't what is in the file you posted.
The VCR macro in the file you posted is the only macro that uses Phantom1, but it is quite different from the above and uses Phantom1 while in AUX1 mode, not SAT mode, so it won't work.
I didn't yet look past that to see if there are other problems. |
|
Back to top |
|
|
jbollt
Joined: 14 Dec 2003 Posts: 53
|
Posted: Wed Jan 21, 2004 5:24 pm Post subject: |
|
|
Nils..sorry..you are right, I changed it a couple of times before I uploaded it ......now it reads....
TV; POWER; CBL/SAT; PHANTOM 1; AUX1; POWER; TV/ VIDEO; VCR; POWER; TV; TV/VIDEO; 1; VCR |
|
Back to top |
|
|
jbollt
Joined: 14 Dec 2003 Posts: 53
|
Posted: Wed Jan 21, 2004 5:41 pm Post subject: |
|
|
And....tada! Now it works! Thanks for all of your help, Nils, John, Greg etc.... I am truely greatful for all of your help and non-judgmental patience with this (little bit slow) newbie.
Jeff |
|
Back to top |
|
|
jbollt
Joined: 14 Dec 2003 Posts: 53
|
Posted: Wed Jan 21, 2004 6:33 pm Post subject: |
|
|
FYI. I have deleted the file in the Diag area of Yahoo.
Thanks again for all of your help.
Jeff |
|
Back to top |
|
|
|