View previous topic :: View next topic |
Author |
Message |
Raul_Giacoman
Joined: 27 Sep 2003 Posts: 23
|
Posted: Sat Sep 27, 2003 6:26 pm Post subject: How to program remote to handle two tivos in same room |
|
|
I have a URC 6131 with jp1. I am trying to control two tivos in one room. I have a directivo and a standalone tivo. I have configured the directivo to channel 1 and the standalone tivo on channel 2. I am using code 1142 for the directivo and 0618 for the standalone on my remote. Both these codes control both tivos. In JP1, how do you specify channel 1 and channel 2? |
|
Back to top |
|
|
uwereinert Advanced Member
Joined: 27 Aug 2003 Posts: 153 Location: Chemnitz |
Posted: Sun Sep 28, 2003 1:15 am Post subject: |
|
|
Via the unit code. Take your upgrades and set the unit code in KM to 1 for your directivo and to 2 for the standalone.
Uwe |
|
Back to top |
|
|
gfb107 Expert
Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC |
Posted: Sun Sep 28, 2003 11:18 am Post subject: |
|
|
Doing this with a 6131 is a little trickier than many other JP1 remotes, but not abog deal. For technical reasons, you'll need to install Extender 1 for the URC-6131 (available as 6131ex1.zip in the Files > Extenders > URC-6131 folder at the Yahoo JP1 group.)
You'll need either KeymapMaster ( keymap-master.zip in Files > 2. Tools, it requires Microsoft Excel) or RemoteMaster (see the installation instructions for its requirements, which are available as a free downloads, and how to install it.)
If you use KeymapMaster, you'll need the "Hughes-HDVR2.txt" file from the Files > 3. Device Codes > PVR folder. Use the Load button to load the device upgrade. Change the remote to "URC-6131 PVR Extender". Switch to the buttons sheet and check that you are happy with the function to button assignments.
If you use RemoteMaster, you'll need the URC6131_TiVo.rmdu file in the Files > 4. RM Upgrade Files > PVR folder. Once you've downloaded it, just double-click on it.
You are going to create 2 different device upgrades, one using unit code 1, and the other unit code 2. Each must have a different setup code. You could use 0619 and 1143 if you like.
Copy the device upgrades into IR (you only need to copy the protocol once).
If you get stuck, we can help more. _________________ -- Greg
Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST) |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Sun Sep 28, 2003 11:39 am Post subject: |
|
|
Why do you need an extender to do this? Apart from the URC-6131 using a different format for keymoves, it works the same as any other JP1 remote.
he should be able to create upgrades in the regular fashion using either KM or RM, and just set the unit code to the appropiate value. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Raul_Giacoman
Joined: 27 Sep 2003 Posts: 23
|
Posted: Sun Sep 28, 2003 12:50 pm Post subject: |
|
|
Thanks for the information. I asked the same question in a tivo forum and somebody sent me a file that contained the necessary upgrades. I believe this solution is the same that "The Robman" suggested and it appears to be working fine. Thanks for the help. |
|
Back to top |
|
|
gfb107 Expert
Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC |
Posted: Sun Sep 28, 2003 7:02 pm Post subject: |
|
|
The Robman wrote: | Why do you need an extender to do this? Apart from the URC-6131 using a different format for keymoves, it works the same as any other JP1 remote.
he should be able to create upgrades in the regular fashion using either KM or RM, and just set the unit code to the appropiate value. |
I guess an extender isn't strictly required for this, but if he ends up doing any keymoves, he'll need the extender to do them using IR.
Anyway, I'll grab the upgrade file from TiVoCommunity, and put it up in the files section on JP1 Yahoo.
Edit: Never mind, it's already there. _________________ -- Greg
Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST) |
|
Back to top |
|
|
|