View previous topic :: View next topic |
Author |
Message |
gregnash
Joined: 19 May 2009 Posts: 47 Location: Carson Ciy, NV |
Posted: Sat Aug 01, 2009 1:58 am Post subject: Looking for info on how to setup Atlas OCAP 1056 |
|
|
to control my Tivo
Finally got my Atlast 1056 from ebay and my JP1.x cable from Tommy. I have downloaded the IR.exe and RM applications. I have downloaded the information from the remote so I have a backup and have the ability to play with it but I can find no documentation for it to control a tivo box (Series 2).
Thanks for your help ahead of time as I am sure that I will be back _________________ Treat everyday like a dog:
If you can't eat it or hump it...
Piss on it and walk away |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
|
Back to top |
|
|
gregnash
Joined: 19 May 2009 Posts: 47 Location: Carson Ciy, NV |
Posted: Sat Aug 01, 2009 6:09 pm Post subject: |
|
|
Thanks Rob I did find that last night after I wrote the original message and began working my way through it. However, the 1056 is NOT a learning remote is it? I thought that there were some that were learning remotes but I cannot seem to find that original post anywhere (probably right under my nose).
One question though. I have downloaded RemoteMaster and every time I open it up it gives me a "No RDF File found" error? However, I have downloaded all the RDF files like specified in the beginners guide and placed them within the RemoteMaster main folder. I have set the RDF path in IR to point to that folder but still get the error? Is there something I am doing wrong or is KM easier to use? _________________ Treat everyday like a dog:
If you can't eat it or hump it...
Piss on it and walk away |
|
Back to top |
|
|
MaskedMan Tivo Expert
Joined: 10 Feb 2004 Posts: 1006 Location: Boone, IA |
Posted: Sat Aug 01, 2009 9:08 pm Post subject: |
|
|
See if built-in vcr code 0618 or 20618 will work for now. _________________ Edmund |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Sat Aug 01, 2009 10:59 pm Post subject: |
|
|
You only need a learning remote to capture the signals from a new device that we haven't seen before. The Tivo was one of the very first device upgrades that we created when we started the JP1 group back in late 2000, so I think we've got you covered with upgrades for that. Plus, as Edmund points out, there are a couple of built-in codes that will probably work it. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
gregnash
Joined: 19 May 2009 Posts: 47 Location: Carson Ciy, NV |
Posted: Sun Aug 02, 2009 3:07 am Post subject: |
|
|
Ok was finally able to find the file section (like I said was under my nose and didnt even see it) so I downloaded the upgrades for the Tivo and the Master File you created for the Vizio TVs. It is late so I am going to have to test this out in the morning.
Quick question though... I am using KM and when I hit the "Goto IR" button it does nothing. I think I accidentally disable this function, so how do I turn it back on? _________________ Treat everyday like a dog:
If you can't eat it or hump it...
Piss on it and walk away |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Sun Aug 02, 2009 4:14 am Post subject: |
|
|
gregnash wrote: | I am using KM and when I hit the "Goto IR" button it does nothing. I think I accidentally disable this function, so how do I turn it back on? | On the Tools menu select, Macro, Macros..., and then run the AutoRunIR macro. _________________ Mark |
|
Back to top |
|
|
gregnash
Joined: 19 May 2009 Posts: 47 Location: Carson Ciy, NV |
Posted: Sun Aug 02, 2009 3:24 pm Post subject: |
|
|
Ok got that running, thanks Mark.
Now I ran into something different. The main tab in IR is now only showing the Download/Upload buttons (General Tab) I have lost the stuff that was up top showing me all the codes that were currently in use.
I have looked through that settings and cannot seem to find where it was turned off. Any ideas? _________________ Treat everyday like a dog:
If you can't eat it or hump it...
Piss on it and walk away |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Sun Aug 02, 2009 3:59 pm Post subject: |
|
|
Did you download the RDF files and tell IR where to find them? _________________ Mark |
|
Back to top |
|
|
gregnash
Joined: 19 May 2009 Posts: 47 Location: Carson Ciy, NV |
Posted: Sun Aug 02, 2009 4:05 pm Post subject: |
|
|
Mark Pierson wrote: | Did you download the RDF files and tell IR where to find them? |
Yeah I set the IRPath in the Set Directory area. _________________ Treat everyday like a dog:
If you can't eat it or hump it...
Piss on it and walk away |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Sun Aug 02, 2009 8:48 pm Post subject: |
|
|
gregnash wrote: | Ok got that running, thanks Mark.
Now I ran into something different. The main tab in IR is now only showing the Download/Upload buttons (General Tab) I have lost the stuff that was up top showing me all the codes that were currently in use.
I have looked through that settings and cannot seem to find where it was turned off. Any ideas? | I'll bet that you have inadvertently re-sized your windows ands completely obliterated that portion of the view in the General Tab. If I understand you correctly, you used to have IR look like
and now it looks like
Am I correct?
You need to place your cursor directly above the UPLOAD and DOWNLOAD button, and it should change shape, allowing you to click and drag down the top edge of the UPLOAD/DOWNLOAD/"Notes" section of the display, and exposing the "Device Buttons" and "Other Settings" sections. _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
gregnash
Joined: 19 May 2009 Posts: 47 Location: Carson Ciy, NV |
Posted: Mon Aug 03, 2009 12:13 am Post subject: |
|
|
You are right and I did see the cursor change when I found that area but I was not able to change the screen. One thing that may be a factor is that I am doing this on my laptop with the release client (RC7100) of Windows 7 Ultimate 32bit, so that may play a role in the issues that I have been having. I am going to try both RM and KM on my main Vista desktop to see what happens. _________________ Treat everyday like a dog:
If you can't eat it or hump it...
Piss on it and walk away |
|
Back to top |
|
|
|