View previous topic :: View next topic |
Author |
Message |
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21246 Location: Chicago, IL |
Posted: Thu Sep 30, 2004 3:46 pm Post subject: |
|
|
This seems as good a place as any to store this link. The following URL is to a web site that describes in pretty good detail how you can make changes using the Service Menu of Sony TV's.
http://myweb.accessus.net/~090/sonyadj.html _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21246 Location: Chicago, IL |
Posted: Sat Jul 07, 2007 6:16 pm Post subject: |
|
|
I have just compiled a spreadsheet containing all the codes from Rob Humprey's site. My goal is to add a cross-reference chart that lists which devices use each of these codes, but in case it's useful to you for something already, I've posted it in the file section.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4768 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
chercheur
Joined: 30 Nov 2022 Posts: 2
|
Posted: Fri Dec 02, 2022 3:51 am Post subject: |
|
|
Good morning,
I'm quite new to this IRC world so...I hope I'm not asking a question that sounds as an evidence to everybody (even if I searched for a few days already).
To summarize I would like to use the codes found on those 2 places:
- http://www.hifi-remote.com/sony/Sony_dat.htm Note diagnostic is 86
- http://www.hifi-remote.com/cgi-bin2/ueic.cgi?DAT_0093 Note here diagnostic code is 089
For this I emulate a RC based on Arduino.
It expects commands like : sendIR 0x5C7
After many trials I'm able to make it work but it required to translate the Sony type to 7 bits binary, return it, translate the command number into 5 bits binary, return it and then couple them to, finally, convert it to HEX.
(note that only 086 works as well as all the codes on that (first) URL).
So, I'm happy.
But would a converter exist ?
Thanks in advance for your help. |
|
Back to top |
|
|
ckeays
Joined: 12 Jan 2015 Posts: 131 Location: Toronto, Ontario |
Posted: Sat Dec 03, 2022 7:56 am Post subject: |
|
|
what is the arduino code doing?
is it receiving or transmitting or both
it would help if you post a link to the arduino code you are using
and provide a detailed explanation of what you are trying to do
there are many ways you can do what you want
when receiving 12 bits:
the 7 bit command is received first
just shift all bits to right using lsr inst
to get 8 bit byte
and for the 5 bit address shift 3 times using lsr inst
to get 8 bit byte
when transmitting you only have to send the number of bits needed
there should not be any need for any conversion
but then again I have no idea what your arduino code is doing |
|
Back to top |
|
|
chercheur
Joined: 30 Nov 2022 Posts: 2
|
Posted: Sat Dec 03, 2022 8:14 am Post subject: Re: Sony Codes |
|
|
Mark Pierson wrote: | Quite possibly the world's best collection of Sony IR remote codes can be found at Rob Humphries Sony Remote Control Codes site. If you're looking for Sony codes, this is the place to go. |
That's indeed the source of the command I want to trigger. |
|
Back to top |
|
|
|