| View previous topic :: View next topic |
| Author |
Message |
Tiku
Joined: 11 Mar 2014
Posts: 104
|
 Posted: Sun Mar 10, 2024 5:50 am Post subject: URC625000-04R00 And URC625001-00R00 Can't Extract Raw. |
 |
|
Hello friends, i have 3 OSN URC-625000-04R00/00R00, jp1.3 & jp1.4 remotes, unfortunately its not detectable in RMIR, also could not extract the Raw File whereas i have extracted the file from of 1.4 in the past, can anyone please guide me what can be the problem?.
I have tried with CH340 Interface also with FTDI232L Usb to TTL Adaptor.
In The RMIR it says No RDF matches signature starting 3211 for (JP1.3)
And No Remote found for (JP1.4).Pics are uploaded here
Thanks.
https://imgur.com/a/8d5yiCo |
|
| Back to top |
|
 |
mathdon
Expert
Joined: 22 Jul 2008
Posts: 4523
Location: Cambridge, UK
|
| Posted: Sun Mar 10, 2024 1:12 pm Post subject: |
|
|
Let's start with the JP1.3 remote. If RMIR gets as far as saying No RDF matches signature starting 3211 then you should be able to do a raw download with RMIR. On RMIR select Remote > Raw download, then on the panel that opens, press Download. That should then display the raw dowload in hex. Press Save and accept the default filename, then post the raw download for me to see.
If the signature really does start 3211 then you have never used RMIR with that remote. As for the JP1.4 remote, No remotes found does not give me anything to go on. Try a 983 command to read the remote signature and let me know what that gives.
_________________
Graham |
|
| Back to top |
|
|
Tiku
Joined: 11 Mar 2014
Posts: 104
|
|
| Back to top |
|
|
Tiku
Joined: 11 Mar 2014
Posts: 104
|
| Posted: Mon Mar 11, 2024 8:05 am Post subject: |
|
|
| Quote: | | Try a 983 command to read the remote signature and let me know what that gives. |
I assume what you mean to say is that i have to read the blinks in the Factory Setup Menu as explain in the pics.
https://imgur.com/a/FJhZuzy
if i press TV+OK the remote blinks twice and goes into code settings menu
then i press 983 it Again Blinks twice.
But this blinking twice is only working in TV+OK.
Press OSN+OK (Blinks Twice)=Press 983 (Blink Only Once)
Tiku. |
|
| Back to top |
|
|
HamburgerHelper1
Joined: 22 Feb 2014
Posts: 574
|
| Posted: Mon Mar 11, 2024 12:46 pm Post subject: URC625000-04R00 And URC625001-00R00 Can't Extract Raw. |
|
|
I think what Graham meant for you to do is to read the signature of the remote by entering 983 then push 1 and count the number of blinks then press 2 and count the blinks then 3 and 4
The 4 digits will be the signature of the remote
The 9xx commands are here
http://hifi-remote.com/wiki/index.php?title=Manual_Programming_-_9xx_Commands
_________________
Randy |
|
| Back to top |
|
|
mathdon
Expert
Joined: 22 Jul 2008
Posts: 4523
Location: Cambridge, UK
|
| Posted: Mon Mar 11, 2024 2:02 pm Post subject: |
|
|
Randy is right. You first do a long press of Setup until it gives two flashes, then follow his instructions. However, as this is a JP1.4 remote, you have to press 1 through 5, not 4, to get a 5-digit signature.
_________________
Graham |
|
| Back to top |
|
|
mathdon
Expert
Joined: 22 Jul 2008
Posts: 4523
Location: Cambridge, UK
|
| Posted: Mon Mar 11, 2024 2:09 pm Post subject: |
|
|
Tiku, I see from the raw download that you posted that you are using RMIR v2.12.8. Please update it to the current version, RMIR v3.0.12.
_________________
Graham |
|
| Back to top |
|
|
HamburgerHelper1
Joined: 22 Feb 2014
Posts: 574
|
| Posted: Mon Mar 11, 2024 2:14 pm Post subject: URC625000-04R00 And URC625001-00R00 Can't Extract Raw. |
|
|
Is it my imagination or is the pic of the JP1.4 Remote only showing 4 pins on the JP1 header instead of 6 ?
If it only has 4 pins you may have to trace the circuit to make sure your cable is connected correctly
_________________
Randy |
|
| Back to top |
|
|
mathdon
Expert
Joined: 22 Jul 2008
Posts: 4523
Location: Cambridge, UK
|
| Posted: Mon Mar 11, 2024 2:18 pm Post subject: |
|
|
Your raw download shows that it really is a JP1.3 remote that we have never seen before. I await with interest the 5-digit signature that you will get from the JP1.4 remote.
_________________
Graham |
|
| Back to top |
|
|
Tiku
Joined: 11 Mar 2014
Posts: 104
|
| Posted: Tue Mar 12, 2024 2:25 am Post subject: |
|
|
| mathdon wrote: | | Tiku, I see from the raw download that you posted that you are using RMIR v2.12.8. Please update it to the current version, RMIR v3.0.12. |
Yes i know, but since its working without any problem, so i am using old version, i tried with newer version, but sometimes it gets hanged.
| HamburgerHelper1 wrote: | Is it my imagination or is the pic of the JP1.4 Remote only showing 4 pins on the JP1 header instead of 6 ?
If it only has 4 pins you may have to trace the circuit to make sure your cable is connected correctly |
Camera Fault, it has Six pin Header. |
|
| Back to top |
|
|
Tiku
Joined: 11 Mar 2014
Posts: 104
|
| Posted: Thu Mar 14, 2024 8:00 am Post subject: |
|
|
| mathdon wrote: | | Randy is right. You first do a long press of Setup until it gives two flashes, then follow his instructions. However, as this is a JP1.4 remote, you have to press 1 through 5, not 4, to get a 5-digit signature. |
Here is the signature of both the remotes::-
Jp1.3 jp1.4
1-3 1-3
2-2 2-5
3-1 3-7
4-1 4-9
5-2 5-2 |
|
| Back to top |
|
|
The Robman
Site Owner
Joined: 01 Aug 2003
Posts: 21238
Location: Chicago, IL
|
| Posted: Thu Mar 14, 2024 8:03 am Post subject: |
|
|
| Tiku wrote: | | mathdon wrote: | | Randy is right. You first do a long press of Setup until it gives two flashes, then follow his instructions. However, as this is a JP1.4 remote, you have to press 1 through 5, not 4, to get a 5-digit signature. |
Here is the signature of both the remotes::-
Jp1.3 jp1.4
1-3 1-3
2-2 2-5
3-1 3-7
4-1 4-9
5-2 5-2 |
I think he's saying that the first remote is 32112 and the second remote is 35792
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Last edited by The Robman on Thu Mar 14, 2024 4:58 pm; edited 1 time in total |
|
| Back to top |
|
|
Tiku
Joined: 11 Mar 2014
Posts: 104
|
| Posted: Thu Mar 14, 2024 8:07 am Post subject: |
|
|
| yes exactly |
|
| Back to top |
|
|
mathdon
Expert
Joined: 22 Jul 2008
Posts: 4523
Location: Cambridge, UK
|
| Posted: Thu Mar 14, 2024 2:25 pm Post subject: |
|
|
Because of the way that UEI represents signatures in the 983 command, this means that the true signatures are
JP1.3 : 32113211
JP1.4 : 357902
This JP1.3 signature agrees with that obtained from the raw data file that you posted earlier. The JP1.4 signature shows that this is a remote new to us, we do not have an RDF for it. But I am puzzled. We do have an RDF for a JP1.4 URC-625000 OSN remote with signature 348601 that I believe was created for you in 2021. If I am right, how many different URC-625000 OSN remotes do you have?
If you still get No remotes found when trying to download the JP1.4 remote with RMIR, can you please post the rmaster.err file from a download attempt for me to see. This will be in your RMIR installation folder.
_________________
Graham |
|
| Back to top |
|
|
Tiku
Joined: 11 Mar 2014
Posts: 104
|
| Posted: Fri Mar 15, 2024 7:03 am Post subject: |
|
|
| mathdon wrote: | I am puzzled. We do have an RDF for a JP1.4 URC-625000 OSN remote with signature 348601 that I believe was created for you in 2021. If I am right, how many different URC-625000 OSN remotes do you have?
|
I am also confused, i have programmed atleast three OSN URC-625000 successflly in the past with CH340 Interface and these three remotes were in my wardrobe from months, cause i was not having FTDI Interface, for these remotes i bought FTDI interface.
Anyways here is JP1.4 emaster.err file:-
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26854 |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
File Section
Wiki
