| View previous topic :: View next topic |
| Author |
Message |
madbrain
Joined: 09 Jun 2020
Posts: 35
|
 Posted: Thu Oct 05, 2023 2:36 am Post subject: More corruption with ARRX18G |
 |
|
| Folllowing the previous corruption thread, I redid my entire remote from scratch in RMIR 3.03 . Unfortunately, I got into a different corruption situation, one where the remote stops sending any IR codes, but there is still (misleading) feedback on the touchscreen that something is being sent. This happens when I select the "Watch PC" activity and the volume up key for example. The only fix I have found is to open the battery compartment and remove/reinsert the battery. But as soon as I try that sequence again, it'll get into the same state. I have posted the .rmir file on my google drive at https://drive.google.com/file/d/1PRB5J7fox4JHKdlQLVzLgwmpdOkMlHj9/view?usp=sharing . |
|
| Back to top |
|
 |
The Robman
Site Owner
Joined: 01 Aug 2003
Posts: 21238
Location: Chicago, IL
|
|
| Back to top |
|
|
mathdon
Expert
Joined: 22 Jul 2008
Posts: 4523
Location: Cambridge, UK
|
| Posted: Sun Oct 08, 2023 7:40 am Post subject: |
|
|
The problem lies in your settings, not in RMIR. On the General tab you have used Volume Lock to redirect the Vol+, Vol- and Mute keys for all devices to Marantz audio. On the Activities tab you redirect these buttons for the Watch PC activity to PC. That results in a double redirection, first to PC and from there to Marantz audio. The remote does not support such double redirection and it appears that it causes it to lock up.
My testing showed that changing the Watch PC setting for this button group to Marantz audio, so avoiding a second redirection, resolved the lockup issue. Some of the other activities need a similar change.
_________________
Graham |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
File Section
Wiki
