| View previous topic :: View next topic |
| Author |
Message |
HamburgerHelper1
Joined: 22 Feb 2014
Posts: 574
|
 Posted: Mon Oct 17, 2022 9:33 am Post subject: 9xx Commands |
 |
|
Some remotes do not support "980" or "981"
So far we have 972 to 997 documented
What is the official range for 9xx commands? |
|
| Back to top |
|
 |
The Robman
Site Owner
Joined: 01 Aug 2003
Posts: 21238
Location: Chicago, IL
|
|
| Back to top |
|
|
3FG
Expert
Joined: 19 May 2009
Posts: 3367
|
| Posted: Mon Oct 17, 2022 5:38 pm Post subject: |
|
|
| It isn't clear that there is an "official range", but we have seen as low as 960 in conventional JP1.x remotes. I think that newer remotes may respond to even lower codes, as long as the first digit is a "9". |
|
| Back to top |
|
|
HamburgerHelper1
Joined: 22 Feb 2014
Posts: 574
|
| Posted: Mon Oct 17, 2022 5:58 pm Post subject: 9xx Commands |
|
|
| Quote: | | we have seen as low as 960 in conventional JP1.x remotes. |
Interesting, I thought they might go lower than 972
So then it appears that testing more 9xx commands is an appropriate endeavor |
|
| Back to top |
|
|
MaskedMan
Tivo Expert
Joined: 10 Feb 2004
Posts: 1006
Location: Boone, IA
|
| Posted: Mon Oct 17, 2022 6:42 pm Post subject: |
|
|
960 is used in UEI made Directv remotes to program the input button for the tv codes, its unprogrammed by default. 961 is used to program the Directv remote for RF mode.
_________________
Edmund |
|
| Back to top |
|
|
HamburgerHelper1
Joined: 22 Feb 2014
Posts: 574
|
| Posted: Tue Oct 18, 2022 11:10 am Post subject: 9xx Commands |
|
|
The only thing i have found so far is that on the
URC-3660
URC-3680
URC-2056 TITAN
all of which are JP1.4
968 SET VENDOR SETUP ID
and
989 BLINK BACK VENDOR SETUP ID
Not very helpful though
Did not test all but JP 1.3 Have a 988 that returns 2 blinks the 1st time but not sure what it's doing. Backup upload restores it |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
File Section
Wiki
