View previous topic :: View next topic |
Author |
Message |
mdavej Expert
Joined: 08 Oct 2003 Posts: 4505
|
Posted: Wed May 25, 2022 5:01 pm Post subject: |
|
|
Thanks.
Just drag some functions to the Shift column of the buttons tab of RM or on the Layout tab with Shift selected. Then tap SETUP followed by the button to test. To test a shifted Number key, you have to tap SETUP twice. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21254 Location: Chicago, IL |
Posted: Thu May 26, 2022 7:55 am Post subject: |
|
|
You'll need to remove the Shift=0 thing that you added first, as that prevents you from programming shifted functions. Then, just like how you programmed shift/MENU and INFO earlier, program something to some other shifted buttons. To test these new functions, don't try doing a long hold like you did in the previous tests, instead TAP the SETUP button then TAP the button that you programmed. For example, if you programmed something to shift/POWER, you would tap SETUP then tap POWER and see if it performed the function that you programmed.
While you're doing this, please program 2 different functions to shift/MENU and shift/INFO, so we can sure which is which. Last time you programmed the POWER function to both buttons. Maybe this time put POWER on shift/MENU and GUIDE on shift/INFO. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4505
|
Posted: Thu May 26, 2022 12:51 pm Post subject: |
|
|
Ultimately, since the long presses and shifts overlap, I think it would be best to add the ":Shift" binding to Menu and Info buttons in the RDF to prohibit their shifts being used. We have a similar overlap issue with the colored buttons in the RDF for the CM-7500XRC2 due to the huge number of buttons in Button Map 3. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21254 Location: Chicago, IL |
Posted: Thu May 26, 2022 4:30 pm Post subject: |
|
|
I think that's our intention, but first we need to determine if any shifting is allowed as that will tell us whether to block all shifting or just block it for those 2 buttons. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
alfalfa
Joined: 11 May 2022 Posts: 17
|
Posted: Thu May 26, 2022 5:52 pm Post subject: |
|
|
Hello
Thanks to all of you for your help!
The shift function (second function of a key), works fine, although it is not supported on the number keys (0, 1, 2, 3… 9).
But by doing the latter the original keys change their default function.
I need more time to better study the behavior and see if there is any relationship.
Is the maximum number of remote control writes 100? Samsung S3F8 processor
Greetings |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4505
|
Posted: Thu May 26, 2022 6:20 pm Post subject: |
|
|
alfalfa wrote: | The shift function (second function of a key), works fine, although it is not supported on the number keys (0, 1, 2, 3... 9). |
Did you tap SETUP twice for the number keys like I mentioned before? |
|
Back to top |
|
|
alfalfa
Joined: 11 May 2022 Posts: 17
|
Posted: Thu May 26, 2022 7:37 pm Post subject: |
|
|
I forgot it. I try it and then I comment. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21254 Location: Chicago, IL |
Posted: Fri May 27, 2022 7:58 am Post subject: |
|
|
I think we have our conclusion. SHIFT *is* supported, but it should be restricted on MENU and INFO, plus we'll need 2 new button names for 94 and 95. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4524 Location: Cambridge, UK |
Posted: Fri May 27, 2022 1:17 pm Post subject: |
|
|
Please try these RDF, map and image files which should include everything agreed above, including the new image file supplied by alfalfa. _________________ Graham |
|
Back to top |
|
|
alfalfa
Joined: 11 May 2022 Posts: 17
|
Posted: Fri May 27, 2022 9:38 pm Post subject: |
|
|
mathdon wrote: | Please try these RDF, map and image files which should include everything agreed above, including the new image file supplied by alfalfa. |
Wonderful!
I didn't find any fault
I'm going to try a few more days, but it seems to be perfect, ready to include it in new release.
Thanks!!!! |
|
Back to top |
|
|
alfalfa
Joined: 11 May 2022 Posts: 17
|
Posted: Mon May 30, 2022 10:40 am Post subject: |
|
|
Hi
I was "playing" all weekend with the remote control and everything has worked fine. So I think it's ready to include it in RM.
I still have to test Dev8, Dev10 and if it supports macros, but that will be in another stage.
The original Manual of this remote control can be downloaded or read from here (It is written in Spanish and Portuguese):
https://www.oneforall-argentina.com.ar/sites/default/files/2018-12/711296%20Manual%20URC1289%20RDN-1060717.pdf
Many thanks to all of you for your help and collaboration. |
|
Back to top |
|
|
KirkG
Joined: 17 Apr 2021 Posts: 10
|
Posted: Mon Oct 31, 2022 11:40 am Post subject: |
|
|
mathdon wrote: | Please try these RDF, map and image files which should include everything agreed above, including the new image file supplied by alfalfa. |
Those files are gone.
I wanted to copy the lines for button 94 and 95 into the map for URC-1280v2 as that model also supports long key press for rew and ff.
Can somebody advice me?
Thank you!!
KirkG |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4524 Location: Cambridge, UK |
Posted: Mon Oct 31, 2022 12:40 pm Post subject: |
|
|
KirkG wrote: | mathdon wrote: | Please try these RDF, map and image files which should include everything agreed above, including the new image file supplied by alfalfa. |
Those files are gone. |
Files are deleted from the RDF Development folder once they are included in an official release of RMIR. They are in the current release, v2.14.15. You will find 364801 (URC-1289 Contour 8 LA).rdf in the RDF subfolder, URC-1289.map and URC-1289.jpg in the Images one. _________________ Graham |
|
Back to top |
|
|
KirkG
Joined: 17 Apr 2021 Posts: 10
|
Posted: Mon Oct 31, 2022 1:19 pm Post subject: |
|
|
Thank you Graham!
Unfortunately something seems to be incorrect in my URC-1289.map.
There are no entries for "SkipBack" and "SkipForward" or similar.
Also, the layout looks like this in RMIR which seems to be messed up by anything.
I found out that the entry in the maps-file is not necessary to setup both the long press buttons. The change alone in the RDF is sufficient.
[/img] |
|
Back to top |
|
|
alfalfa
Joined: 11 May 2022 Posts: 17
|
Posted: Mon Oct 31, 2022 8:12 pm Post subject: |
|
|
Hello I'm sorry, I kept using the previous version and I didn't see the bugs in the new one. |
|
Back to top |
|
|
|