View previous topic :: View next topic |
Author |
Message |
Tiku
Joined: 11 Mar 2014 Posts: 104
|
Posted: Mon Jan 11, 2021 7:32 am Post subject: Jp 1.2/1.3 DIY Serial Interface To Upgrade JP 1.4? |
|
|
Hello friends, can anyone please guide me. Can I use my home made JP 1.2/1.3 Serial Interface (3 Transistor Design) to upgrade JP 1.4 remote? I am attaching the pic of the JP 1.4 Remote. Thanks
https://imageupload.io/CswtfX3t8a.g |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Mon Jan 11, 2021 10:17 am Post subject: |
|
|
JP1.4 uses the same interface as JP1.3. But if there is no RDF for this model, a new one would need to be developed. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Sun Jan 24, 2021 2:00 pm Post subject: |
|
|
Tiku wrote: | Thanks Robman, OK i tried to check interface in IR.exe but it says ir interface fail, so i did Raw Download in RMIR, and i have attached my file in Diagnostic area by the Name Tele2, can you please tell is is there any RDF File available for my model, on the PCB It printed
URC-462000-xxR00
46100+003+0111
UEIS-12171
REV:00
Regards.
Here is my Raw Download File,PCB Pic with S00-S55 Is also inside.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26214 |
IR.exe is obsolete and can't handle the latest type of JP1 remotes.
I have split your new RDF request split to here:
http://www.hifi-remote.com/forums/viewtopic.php?t=102698 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|