View previous topic :: View next topic |
Author |
Message |
HamburgerHelper1
Joined: 22 Feb 2014 Posts: 580
|
Posted: Wed Oct 02, 2019 3:26 pm Post subject: vendor setup ID segment |
|
|
I noticed vendor setup ID segment added to RMIR awhile back with my
INT 422-3, it shows up as type 14
Should 14 then be added to the segment types in the RDF ?
Just curious |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4524 Location: Cambridge, UK |
Posted: Thu Oct 03, 2019 12:03 pm Post subject: |
|
|
Adding type 14 in the RDF would do no harm, but it is not necessary and I would not propose to do it in the official version of the RDF. RMIR does not use this segment type, cannot change it and can do nothing with the value in it. Segments that are not listed in the RDF but are present in the remote are preserved unchanged in downloads and uploads and in saved .rmir files, which is all that would happen too if the RDF included it. _________________ Graham |
|
Back to top |
|
|
HamburgerHelper1
Joined: 22 Feb 2014 Posts: 580
|
Posted: Thu Oct 03, 2019 1:45 pm Post subject: vendor setup ID segment |
|
|
Thank you for an excellent explanation
I did not think it would matter but I thought I would ask. |
|
Back to top |
|
|
|