JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

How do I convert IR values into JP1 terms?

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - General Forum
View previous topic :: View next topic  
Author Message
120240VAC60HZ



Joined: 17 Mar 2007
Posts: 183
Location: Trumbull, Connecticut

                    
PostPosted: Mon Aug 05, 2019 9:14 am    Post subject: How do I convert IR values into JP1 terms? Reply with quote

I found a DMX ProFusion at a thrift store for $2 (It is worth more then that in parts).

Anyway I did not get a remote or a power supply (as usual).

The power supply I have, the remote I need help with Smile

I found this at Remote Central and I want to convert those IR codes to a usable value for JP1 remotes.

Here is the codes in case the link goes bad.
DMX Pandora ProFusion IR Hex codes

Code:

IR Protocol: NEC6122
 
Remote Button    Code
Mute                   0xdd
Standby              0x9c
1                        0x92
2                        0x93
3                        0xcc
4                        0x8e
5                        0x8f
6                        0xc8
7                        0x8a
8                        0x8b
9                        0xc4
Zone                  0x82
0                        0x87
Delete                 0x88
Visual CH +         0x80
Visual CH -          0x81
Volume-              0x9f
Volume+             0x9e
Menu                  0x95
Music CH +          0x85
Music CH -           0x86
UP                      0xca
LEFT                   0x99
OK                     0xce
RIGHT                 0xc1
DOWN                0xd2
Thumbs Down     0x9d
Thumbs Up         0xc5
RED                   0x89
GREEN               0x84
YELLOW             0xd9
BLUE                  0x96
Skip Back            0xda
Play                    0x83
Pause                 0xc3
Skip FF               0xd6


Thanks
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 4498

                    
PostPosted: Mon Aug 05, 2019 12:08 pm    Post subject: Reply with quote

It may work as described in the first 3 posts here:
http://www.remotecentral.com/cgi-bin/mboard/rc-discrete/thread.cgi?7378

So try NEC1, device 61, subdevice 22
then convert each code to decimal and enter in the OBC column of an RMDU upgrade file, i.e., Mute is OBC 221 (0xDD in decimal).

If that doesn't work, try the other permutations 3FG described (device 97, subdevice 34) or possibly even device 1 or 0, subdevice 0 in case the 6122 is meaningless.
Back to top
View user's profile Send private message
120240VAC60HZ



Joined: 17 Mar 2007
Posts: 183
Location: Trumbull, Connecticut

                    
PostPosted: Mon Aug 05, 2019 2:31 pm    Post subject: Reply with quote

It was device 0 with no sub device

I made the upgrade file and posted it to the file section Here
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - General Forum All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control