View previous topic :: View next topic |
Author |
Message |
quartermain
Joined: 29 Dec 2007 Posts: 46
|
Posted: Sun Dec 08, 2019 7:16 am Post subject: URC-7557 Support |
|
|
I have been using the URC-7555 and 7556 remotes for many years and they suit me perfectly. I found out a while back that there was also a URC-7557 out and bought one for a backup. It appears to be exactly the same as the 7556 bar the model number on the battery cover sticker. I uploaded my current 7556 configuration and it seemed to work fine. There is no available RDF.
A couple of days ago my last remaining 7556 died suddenly - no response to any buttons. It was late so I dug out the 7557 to use for the rest of the evening. Using it in earnest quickly identified an issue - the mute button doesn't work - no response from sound bar and no device button flash. I can get by with Vol+ and Vol- but it's not ideal.
Today I look again. I try uploading the last saved .rmir to the 7556 and it bursts back into life, phew. But it's not going to last forever so I either need to fix the mute on the 7557 or find another remote to use. I have a 6440 but I can't get on with it.
Given that the 7555, 7556 and 7557 have the same signature, is it possible to make an RDF for the 7557 by copying the one for the 7556 then somehow tweak it so the mute function works?
I have .rmir dumps from both the remotes after a factory reset however they are very different in size so I suspect one wasn't really properly reset. |
|
Back to top |
|
|
quartermain
Joined: 29 Dec 2007 Posts: 46
|
Posted: Sun Dec 08, 2019 8:17 am Post subject: |
|
|
Looks like these come with installed upgrades out of the box. I did a 981 on each of them and now the downloaded .rmir files are identical. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21248 Location: Chicago, IL |
Posted: Sun Dec 08, 2019 11:32 am Post subject: |
|
|
If the assumption is that they've wired MUTE to a different button code, you'd need to identify the code for us, by doing a keymove or macro.
Also, as a short term fix, you could look up the EFC for MUTE in your old file and program it to the MUTE button using 994. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
quartermain
Joined: 29 Dec 2007 Posts: 46
|
Posted: Tue Dec 10, 2019 10:58 am Post subject: |
|
|
I think this remote is physically broken. I can't record a macro on to the mute button nor can I learn anything on it.
I tried 994 but I got a double flash when entering the second digit of the EFC which I guess means it wasn't accepted. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21248 Location: Chicago, IL |
Posted: Tue Dec 10, 2019 11:27 am Post subject: |
|
|
I guess that means, if you want to try and save the remote, you'll need to open it up and look for any broken traces on the PCB, or anything else that might be broken. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|